Author Topic: Poulan pro 5020 PR5020 Poulan 5020 4818  (Read 6478 times)

0 Members and 4 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #200 on: June 10, 2015, 08:04:22 pm »
You could always go to 16" 3/8 on it. That is the set up I liked best.  K095 mount bars small huskys.


REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #201 on: June 26, 2015, 12:48:01 pm »
Member measured a like new 5020 drum with not much time on it, 2mm thick. I measured a 3900 drum that has been used a forever with a alot of time on it at 1.55mm thick.

Measurements taken where clutch makes contact on drums.
REDNECK Saw Repair Getter Done

Offline old guy

  • 4 cube
  • **
  • Posts: 49
  • Karma: 12
Re: Poulan pro 5020
« Reply #202 on: June 26, 2015, 04:46:31 pm »
After reading the previous post I measured my clutch drum thickness with a starret ball mike at a constant .069 - .070, converting this to metric on my digital caliper resulted in 1.77 m/m.
 The drum is also showing a bit of a flare at the edge, so I guess this particular drum is not going to work on this particular saw.
 Maybe it was not heat treated correctly.  ymmv

   John

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #203 on: June 27, 2015, 11:58:15 am »
My echo drum was labeled OEM echo not one of the aftermarket ones like herr etc. You might be onto something there.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
New Poulan PR5020
« Reply #204 on: February 07, 2017, 02:33:35 pm »
Wondering whats new with the Poulan PR5020 over the PP5020AV that is out.  4818 is the same as 5020 just shorter bar

Poulan PR 5020 IPL http://www.poulanpro.com/ddoc/PPOI/PPOI2016_AAaa/PPOI2016_AAaa_PR5020_2016-04.pdf
REDNECK Saw Repair Getter Done

Offline Revpop

  • 5 cube
  • ***
  • Posts: 84
  • Karma: 16
  • Location: Oak Harbor, WA 98277
Re: New Poulan PR5020
« Reply #205 on: March 26, 2017, 03:28:11 pm »
Looks like an aesthetic makeover, combined with some new marketing upgrades:
http://www.poulanpro.com/us/products/chainsaws/pr5020/967061401/
Like Like x 2 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #206 on: January 02, 2018, 11:12:35 am »
New redesigned poulan PR5020 pics at all sides. http://www.poulanpro.com/us/products/chainsaws/pr5020/967061401/

Will merge the other 5020 threads too.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #207 on: January 02, 2018, 08:32:53 pm »
Check that out looks like a side tensioner on the clutch cover

PR5020
Part number: 967061401
Powered by a 50cc 2-cycle engine, the Poulan Pro PR5020 chainsaw is powerful and very easy to start and operate. A robust, all-round model with low weight, equipped with OxyPower engine for more power, lower emission levels and lower fuel consumption. Quick and easy to start, featuring Soft Start, purge and integrated choke/stop controls. Easy handling and maintenance with convenient side adjust chain tensioning along with easy access clips on the cylinder cover for fast access to filter and spark plug. Combi tool integrated in the rear handle. Backed by a 2-year limited warranty.

REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4444
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Poulan pro 5020
« Reply #208 on: January 02, 2018, 10:26:47 pm »
Yep sure looks like a side tensioner to me too.   
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21766
  • Karma: 517
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020 PR5020 Poulan 5020 4818
« Reply #209 on: February 01, 2018, 03:10:24 pm »
Found 2 saws today. Thought why not a PR5020 with side tensioner PHO. 

Other one was a nice 353 in 353 thread.

pics

REDNECK Saw Repair Getter Done
Like Like x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 39 40 » Poulan

399 Replies
8249 Views
Last post March 31, 2020, 03:28:50 pm
by 3000 FPS
4 Replies
526 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1155 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
9 Replies
356 Views
Last post July 09, 2013, 04:07:30 pm
by moparman texas
3 Replies
269 Views
Last post March 09, 2013, 06:49:38 pm
by Cut4fun .
11 Replies
467 Views
Last post March 16, 2014, 04:12:43 pm
by Cut4fun .
1 Replies
131 Views
Last post May 14, 2015, 03:29:42 pm
by 660magnum
10 Replies
308 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan
2 Replies
208 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
204 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .