Author Topic: Poulan pro 5020 PR5020 Poulan 5020 4818  (Read 5401 times)

0 Members and 3 Guests are viewing this topic.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3796
  • Karma: 140
  • OHIO REDNECK
Re: Poulan pro 5020
« Reply #40 on: February 28, 2013, 08:08:08 pm »
I thought I had read somewhere they used a K041 mount and I went back to the one Mark had done his reviews on and he is pretty convinced the one he got came with a K041 mount that oiled through the adjuster not a oil hole. 

No clue what his was. But I know for sure what mine is K095
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3796
  • Karma: 140
  • OHIO REDNECK
Re: Poulan pro 5020
« Reply #41 on: February 28, 2013, 08:12:32 pm »
Another owner of one posted from July 2012 K095 mount he said.

 

Iíve ordered a new bar and chain, the Oregon 200RNDK095 bar and the 72LPX072G chain. Itís not any longer, but has a replaceable sprocket and the chain is two links longer.
REDNECK Saw Repair

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3796
  • Karma: 140
  • OHIO REDNECK
Re: Poulan pro 5020
« Reply #42 on: February 28, 2013, 08:18:35 pm »
Roger this is Mark's post.

Quote from: Modifiedmark
I agree but if you seen, getting a .325 drive spocket for one seems to be the big problem. Nice it has the K095 bar mount   and the saw run really well with a 16" 3/8s setup so its not really that big a deal.

70DL on a 20" has been standard on a Poulan forever.
REDNECK Saw Repair

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4256
  • Karma: 248
  • Location: Carpenter, Wyoming
Re: Poulan pro 5020
« Reply #43 on: February 28, 2013, 08:23:50 pm »
Roger this is Mark's post.

Quote from: Modifiedmark
I agree but if you seen, getting a .325 drive spocket for one seems to be the big problem. Nice it has the K095 bar mount   and the saw run really well with a 16" 3/8s setup so its not really that big a deal.

70DL on a 20" has been standard on a Poulan forever.


I did some more searching and found that he had intially made a mistake and then later corrected it.   I missed the correction.    So K095 it is and will ever be.
PP 505, 475, 445.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3796
  • Karma: 140
  • OHIO REDNECK
Re: Poulan pro 5020
« Reply #44 on: February 28, 2013, 08:25:16 pm »
Quote from: Modifiedmark
Well after some investigation, I found that I am the one with egg on my face. I was wrong on the bar mount, this saw does indeed use a K095 mount bar. Here is a picture that I took when I first broke this thing down to inspect it. I am so used to the K041 mounts on these mid sized Poulans I never noticed that the bar does indeed have the K095 style oiler hole in it. I can't belive that I missed that, but this is not a bad thing.

It just so happens I had a 16" 3/8's Power Match in K095 and put it on with a new 60DL Oregon 72LGX chain to try out.


Another on correction he made.

Try and attach Mark's pic another way. Roger still red X?
REDNECK Saw Repair

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #45 on: February 28, 2013, 08:31:21 pm »
Does Mark's pic show up in his post above?
REDNECK Saw Repair Getter Done

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6424
  • Karma: 245
  • For The Love Of Chainsaws
  • Location: NCO
Re: Poulan pro 5020
« Reply #46 on: February 28, 2013, 09:13:13 pm »
yes there is a quote and picture of a bar & chain
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4256
  • Karma: 248
  • Location: Carpenter, Wyoming
Re: Poulan pro 5020
« Reply #47 on: February 28, 2013, 09:33:26 pm »
                  if your talking about the quote then all I see is a red X.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 20226
  • Karma: 441
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan pro 5020
« Reply #48 on: March 01, 2013, 06:37:40 am »
                  if your talking about the quote then all I see is a red X.

How about now?
REDNECK Saw Repair Getter Done

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 66
  • Location: brockville ontario canada
Re: Poulan pro 5020
« Reply #49 on: March 01, 2013, 07:23:59 am »
pic has worked for me the whole time :) so there!
when I grow up, i wanna be an adult.

 

Related Topics

  Subject / Started by Replies Last post
Poulan 505

Started by man of stihl « 1 2 ... 37 38 » Poulan

375 Replies
7729 Views
Last post August 15, 2018, 08:46:53 am
by Cut4fun .
Poulan 425

Started by Cut4fun « 1 2 » Poulan

15 Replies
989 Views
Last post March 18, 2014, 02:19:35 pm
by Cut4fun .
4 Replies
427 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
819 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
9 Replies
351 Views
Last post July 09, 2013, 04:07:30 pm
by moparman texas
3 Replies
249 Views
Last post March 09, 2013, 06:49:38 pm
by Cut4fun .
11 Replies
430 Views
Last post March 16, 2014, 04:12:43 pm
by Cut4fun .
1 Replies
107 Views
Last post May 14, 2015, 03:29:42 pm
by 660magnum
10 Replies
252 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan
2 Replies
150 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .