Author Topic: Poulan pro 5020 PR5020 Poulan 5020 4818  (Read 16915 times)

0 Members and 36 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan pro 5020
« Reply #80 on: March 12, 2013, 08:11:33 pm »
You pull up the Husqvarna 2011 450 IPL and there is a lot of look alike around the carb with the air valve on top and also the starter pulley size but everything else is different.

Ill have to spend more time on this search later.  To see what will interchange and the similarities or not.

Husqvarna 450 IPL  http://www.husqvarna.com/ddoc/husi/husi2011_aaaa/husi2011_aaaa_450_201107.pdf

PP5020AV IPL  http://www.oscar-wilson.com/MANUALS/POULAN/PP5020AV.PDF

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan pro 5020
« Reply #81 on: February 05, 2014, 04:47:25 pm »
Poulan 5020 PHO weight.


Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4706
  • Karma: 320
  • Location: Carpenter, Wyoming

  • Total Badges: 43
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 7 Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary
Re: Poulan pro 5020
« Reply #82 on: February 05, 2014, 04:58:37 pm »
Kevin can you add that picture to the Poulan thread for PHO weights.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Husqvarna 450 PP5020
« Reply #83 on: March 17, 2014, 04:33:29 pm »
Was just talking today with new owner of the 5020. Telling him how it compared to the 450 I had in shop.  Like cousin saws with different cylinders is what I noticed.

My question is does the 450 and 5020 share the same crankshaft?  Reason I ask the 450 was set up with .325 and 5020 with 3/8 and only 325 set up I found to fit directly on the small 5020 crankshaft was from echo.

Wondering now if the husky 450 crank is same size and if so the 325 clutch drum set up may work on 5020?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 450 PP5020
« Reply #84 on: March 17, 2014, 04:43:54 pm »
Going to say no after finding both crankshafts.  5020 is stepped down again.


Offline bloodontheice

  • 6 cube
  • ****
  • Posts: 206
  • Karma: 29

  • Total Badges: 19
    Badges: (View All)
    Fifth year Anniversary Fourth year Anniversary Karma Good Level 4 Third year Anniversary Karma
Re: Husqvarna 450 PP5020
« Reply #85 on: March 17, 2014, 04:59:47 pm »
Had a guy buy one of those PP5020 from TSC, and ran it for a month and hated it.
It came set up with a 3/8 20" bar, which is ridiculous, he returned it to TSC and bought a 2250 from me.
I thought the PP would be a 095 bar mount like, and could swap it all over but nope it's some goofy homelite mount.
That runs 70 drive links of 3/8 chain.

I was hoping there would be some over lap since he had a couple bars and chains that he bought brand new with
the 5020 and could swap them to the Jonsered. 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Husqvarna 450 PP5020
« Reply #86 on: March 17, 2014, 05:14:48 pm »
5020 is a K095 mount in 70dl OEM Cale. I think some called it Z095 for 70dl but it is a K095 mount actually.   I ran 60dl 16" K095 bar.

IMO need tuned out of the box.  I owned one and it fits the bill for under $200 50cc saw IMO.


Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 71
  • Information collector
  • Location: Troms, North Norway

  • Total Badges: 28
    Badges: (View All)
    Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 1000 Posts Third year Anniversary Spammer 25 Posts in one day
Re: Husqvarna 450 PP5020
« Reply #87 on: March 18, 2014, 08:37:47 am »
5020 is a K095 mount in 70dl OEM Cale. I think some called it Z095 for 70dl but it is a K095 mount actually.  .....

I believe you are right, and that the "Z" (in place of "K") just means that the bar has a non-standard dl count.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2117
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming

  • Total Badges: 37
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary
Re: Husqvarna 450 PP5020
« Reply #88 on: March 19, 2014, 04:25:31 am »
Right now I have a 5020 that belongs to the park that I volunteer in.  Damn thing has almost no time on it, but is acting like it has leaking crank seals. Wandering tune, goofy needle settings, bogging, and a LS tune that changes when the saw is tilted.

 I have no desire to expend the effort getting set up to pres/vac test that goofy stratto Poulan.  Will probably instead just throw new seals and an intake boot/block at it.  A fellow bought it as a $99 refurb on line and donated it to the park.  Now I have it 'cause it won't tune.  Yuck.  To me it's a big step backwards from the PP295/4620/2900/3050 saws for several reasons.  The scrench holder in the rear handle is kinda cool though.....

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Poulan pro 5020
« Reply #89 on: March 19, 2014, 06:15:20 pm »
I like the 5020 over the 295 4620 series saws myself. Not weight wise though.

 

Related Topics

  Subject / Started by Replies Last post
4 Replies
1298 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
3459 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
9 Replies
657 Views
Last post July 09, 2013, 04:07:30 pm
by moparman texas
3 Replies
562 Views
Last post March 09, 2013, 06:49:38 pm
by Cut4fun .
11 Replies
1001 Views
Last post March 16, 2014, 04:12:43 pm
by Cut4fun .
1 Replies
454 Views
Last post May 14, 2015, 03:29:42 pm
by 660magnum
10 Replies
1296 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan
2 Replies
789 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
4 Replies
312 Views
Last post May 07, 2022, 02:21:43 pm
by ~Yellow Streak~
5 Replies
351 Views
Last post October 25, 2023, 12:56:38 pm
by 3000 FPS