Author Topic: Poulan 505  (Read 7927 times)

0 Members and 0 Guests are viewing this topic.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 505 projects
« Reply #20 on: March 02, 2011, 04:51:39 pm »
ok thanks :)
Ron

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 505 projects
« Reply #21 on: March 05, 2011, 02:02:05 pm »
 pics\stuff 001.jpg
got the break handle put on, replaced the 505 limited coil with a partner 500 unlimited coil. ready for the next gtg ;D
any body need a pp505 or j red 2083 green coil?;)
Ron

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21119
  • Karma: 471
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505 projects
« Reply #22 on: March 05, 2011, 03:01:51 pm »
Sweet.  So the Partner 500 5000 coils direct bolt in?  Also was it the blue or black coil out of the 500?

Blue dont mean rev-limited in 500 5000 like the huskys.  ;)   I have only had 1 5000 with blue coil so far and it was the strongest one stock so far. I still dont know why, but a retired racer told me the blue coil was the best in the 3 cube partner builds.  I have no clue why, but all mine have been black coils in the hotter 5000's and never tried the blue coil.
REDNECK Saw Repair Getter Done

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 505 projects
« Reply #23 on: March 05, 2011, 03:31:41 pm »
yes, it was a direct bolt on and it is a black coil. i guess we should be on the lookout for a blue one then ;) i once fixed a buddy's husky 257 with a p500 coil and another time i had a pp455 parts saw[pioneer design] and couldn't check for spark because the starter was gone. so took the poulan pro 455 coil and bolted it on the partner 500. only problem with that was the coil wire to the spark plug was too short but i was still able to check for spark.  i believe it would have worked the other way. [p500 coil on the pp455].
Ron

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: Poulan 505 projects
« Reply #24 on: March 06, 2011, 06:50:58 pm »
\My Pictures\saw pics\stuff 013.jpg
on my 505 poulan carb. left hand side there is a brass screw. i would assume that is a governor. but i took it out and it is solid behind it. i even ran it with it out. so what is it?
Ron

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 66
  • Information collector
  • Location: Troms, North Norway
Re: Poulan 505 projects
« Reply #25 on: March 07, 2011, 08:01:43 pm »
Thce saw really is a Partner, and the original design was the P7700.

The "family" consisted of P7700, 710 and 660 - Jred 2077, 2083 and 2083II (really a late 2077, US only) - PP 505, 475, 445, 425 and 415. The cc originally was 76.5c, but ranged from 82.4 down to 65.

Most (if not all) were made at the Husqvarna factory in Sweden, but there never was a Husky version...... ;)

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3921
  • Karma: 143
  • OHIO REDNECK
Re: Poulan 505 projects
« Reply #26 on: March 16, 2011, 04:23:56 pm »
Thanks for sharing that info Niko.

 Right now I have a running 415 and 505. 475 is still in project saw stage.



REDNECK Saw Repair

Offline SawTroll

  • Nitro Hotsaw
  • *******
  • Posts: 1196
  • Karma: 66
  • Information collector
  • Location: Troms, North Norway
Re: Poulan 505 projects
« Reply #27 on: March 18, 2011, 11:34:37 pm »
Be aware that there were two versions of some models, the older ones didn't have the fully developed "Air Injection" (different "names" between the brands), but the newer ones did (basically from 1992).

Offline Modifiedmark

  • 5 cube
  • ***
  • Posts: 80
  • Karma: 2
Re: Poulan 505 projects
« Reply #28 on: March 20, 2011, 11:31:44 am »
Niko, off hand as far as I can tell, the 415 and 475 never had the air injection while the 425,445 and 505 all did.

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3921
  • Karma: 143
  • OHIO REDNECK
Re: Poulan 505 projects
« Reply #29 on: March 21, 2011, 06:43:15 am »
Thce saw really is a Partner, and the original design was the P7700.

The "family" consisted of P7700, 710 and 660 -
Most (if not all) were made at the Husqvarna factory in Sweden, but there never was a Husky version...... ;)

So is the Partner 7700 710 660 a partner made saw or like the poulans a jonsered  saw relabeled?
REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
Poulan 475

Started by Cut4fun « 1 2 ... 35 36 » Poulan

351 Replies
8727 Views
Last post October 25, 2018, 02:04:51 pm
by Cut4fun .
Poulan 260

Started by Cut4fun « 1 2 3 » Poulan

22 Replies
1265 Views
Last post September 19, 2016, 08:43:52 pm
by Chris-PA
Poulan s-25

Started by Al Smith « 1 2 3 4 5 » Poulan

40 Replies
2543 Views
Last post February 07, 2014, 05:41:44 pm
by Eccentric
79 Replies
2658 Views
Last post December 09, 2012, 02:51:01 pm
by Cut4fun .
1 Replies
356 Views
Last post August 14, 2011, 04:40:12 pm
by Cut4fun .
221 Replies
5737 Views
Last post June 21, 2018, 08:30:48 am
by Cut4fun .
4 Replies
453 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
877 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
161 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
149 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .