Author Topic: Poulan 505  (Read 8169 times)

0 Members and 1 Guest are viewing this topic.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4384
  • Karma: 269
  • Location: Carpenter, Wyoming
Re: Poulan 505
« Reply #380 on: November 16, 2018, 11:16:13 am »
Yep it is too nice for you and too much money for me.    Nice looking saw for sure.
PP 505, 475, 445.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #381 on: November 16, 2018, 11:41:48 am »
After running a velocity stack on the 3120 and seeing what it did for it. Now makes me wish I would have picked one the ones for these like on his saw in the past.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #382 on: December 17, 2018, 08:45:35 am »
I was offered this but didnt buy it. 

It is in good hands now though being I know who got it.   8)

Just saving the pic being it was 1 owner with box they came in.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #383 on: January 26, 2020, 09:17:47 am »
I have only seen one other 2 ring 505 piston 54mm. I bought these just to compare the piston to the 1 ring and a 066 piston.  Plus a extra 2083 505 54mm cylinder.

The 2 ring has a bad spot where hit at top. But will work that out of it.

Both mahle

Still not in my hands but on it's way.



REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #384 on: January 28, 2020, 08:03:09 am »
Found another 54mm cylinder that was on a 415. I didnt want the whole saw. So bought just the 505 2083 54mm cylinder and piston with stuck ring.

Heading my way now.





REDNECK Saw Repair Getter Done
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #385 on: January 30, 2020, 11:46:28 am »
I have always seen the 2 ring poulan 505 piston in IPL's but only seen one of them to date. Thats was last year.
Well I finally seen another one. I bought 2 NOS 54mm 2 ring and 1 ring 2083 505 pistons so I could compare.

Plus couldnt pass up a couple 54mm cylinders etc.

As far as pin to pin heights all the same.  What I see different is the window height and the skirt width.

I forgot to check to see if the 2 ring piston used the 1.2mm like a 066.  1 ring uses 1.5mm

I do wonder about their weights alittle bit. Being I can see the differences in thickness there too.  Both being NOS and bare will be easy to way later.

pics



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #386 on: January 30, 2020, 02:28:22 pm »
Uses 1.2mm rings like the 660.  Also can see it beside a meteor 066 piston pin to pin.  66 just a hair taller but skirts just a hair shorter. Plus the pin bosses on 66 narrower and need opened.

Weights of both bare, 2 ring and 1 ring

Roger you can see how off that 52mm that was sold for 475 2077 is off. Pin bosses were right though as in wider as they should be for use.   I am betting they modeled that piston off a 046 460 which is just a miss.  They should have used the stihl 064 650 piston for the 475 2077 2083II 52mm   



pics

 

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21625
  • Karma: 505
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Poulan 505
« Reply #387 on: January 30, 2020, 03:09:45 pm »
The other 2 ring OEM piston I seen for sale last year.

pics
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4384
  • Karma: 269
  • Location: Carpenter, Wyoming
Re: Poulan 505
« Reply #388 on: January 30, 2020, 04:03:08 pm »


[/qu


Roger you can see how off that 52mm that was sold for 475 2077 is off. Pin bosses were right though as in wider as they should be for use.   I am betting they modeled that piston off a 046 460 which is just a miss.  They should have used the stihl 064 650 piston for the 475 2077 2083II 52mm   



Yep that is why it never got installed.



PP 505, 475, 445.
Like Like x 1 View List

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 3993
  • Karma: 155
  • OHIO REDNECK
Re: Poulan 505
« Reply #389 on: January 31, 2020, 08:33:43 am »
Now here is the story on these parts found.

Old poulan dealer storing a ton of parts in a old building and it collapsed. Then everything was getting rained on and someone decided to scrape alot of old sand cast poulans and NOS parts.  Some was sold off local. 

A 16' trailer full of saws and nos parts got scraped for $600.   :'(
REDNECK Saw Repair

 

Related Topics

  Subject / Started by Replies Last post
Poulan pro 236

Started by Cut4fun . « 1 2 3 4 5 » Poulan

48 Replies
1586 Views
Last post December 04, 2015, 10:59:11 am
by Cut4fun .
Poulan 260

Started by Cut4fun « 1 2 3 » Poulan

22 Replies
1308 Views
Last post September 19, 2016, 08:43:52 pm
by Chris-PA
Poulan s-25

Started by Al Smith « 1 2 3 4 5 » Poulan

40 Replies
2585 Views
Last post February 07, 2014, 05:41:44 pm
by Eccentric
1 Replies
362 Views
Last post August 14, 2011, 04:40:12 pm
by Cut4fun .
221 Replies
6317 Views
Last post June 21, 2018, 08:30:48 am
by Cut4fun .
Poulan Pro 455

Started by mweba « 1 2 » Poulan

11 Replies
913 Views
Last post June 12, 2019, 07:43:30 am
by Cut4fun .
4 Replies
516 Views
Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
1114 Views
Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
2 Replies
203 Views
Last post May 21, 2017, 08:59:45 pm
by Cut4fun .
8 Replies
198 Views
Last post December 31, 2018, 09:04:53 am
by Cut4fun .