Author Topic: Poulan/Craftsman 20" 46cc (Read 398 times)

Chris-PA · « **Reply #10 on:** March 22, 2017, 09:03:42 pm »

I've had trouble with the rear spring screws on mine, especially the one that threads into the colored plastic case extension, so I modified it a bit. I drilled a hole in the rear handle so I could use a cap screw inserted down from above, and a nut and star washer. I had to cut the cap screw to the right length. I also added a star washer to the screw that goes into the black plastic handle. It's worked well.

3000 FPS · « **Reply #11 on:** March 22, 2017, 09:50:36 pm »

Not a bad idea Chris. Those do come loose all the time.

Cut4fun . · « **Reply #12 on:** March 23, 2017, 12:24:38 pm »

Yep so far every one has come in loose. 1 was missing bolt and stripped. I went to a larger thread longer stihl plastic screw in bolt. So far good.

Revpop · « **Reply #13 on:** March 26, 2017, 03:06:09 pm »

I have two of these saws the first one is green with the black muffler and the other is red with the silver muffler which is brand new never cut any wood with it yet. The first one is my favorite camping saw, it has a very good power to weight ratio oils very well and sounds like a big saw when idling. I never put a tach to it but sounds like a healthy 13,500 no load rpm if I were to guess.

Chainsaw Repair

News:

Author Topic: Poulan/Craftsman 20" 46cc (Read 398 times)

Chris-PA

Re: Poulan/Craftsman 20" 46cc

3000 FPS

Re: Poulan/Craftsman 20" 46cc

Cut4fun .

Re: Poulan/Craftsman 20" 46cc

Revpop

Re: Poulan/Craftsman 20" 46cc

Related Topics