Author Topic: PP 655 Oiler (Read 347 times)

blsnelling · « **on:** October 17, 2013, 08:53:41 pm »

Good evening gents. A few of you may have been at the Poulan Lover's GTG last Saturday. I know you were Kevin. I have a clean 655 that I've been having trouble getting to oil. First of all, the manual oiler did not work, even when removed from the saw and isolated from the auto oiler. I tried blocking the manual oiler ports, and still no love. I was able to pick up a NOS manual oiler this week. Not only does the manual oiler now work, but the auto oiler does as well. I'm told that there's probably a check valve in it that was bad. The auto oiler will now sling a healthy line of oil, leaving the chain soaked in oil. Hopefully this might help someone else get their 655 oiling again like it should.

3000 FPS · « **Reply #1 on:** October 17, 2013, 09:19:53 pm »

Well Brad I do not have a 655 but I am on the look out for one so that will be good info to keep around.

blsnelling · « **Reply #2 on:** October 17, 2013, 09:53:24 pm »

New manual pumps are available on Ebay for $25.

fastleo151 · « **Reply #3 on:** October 17, 2013, 09:56:02 pm »

Is the old one fixable?

3000 FPS · « **Reply #4 on:** October 17, 2013, 09:57:03 pm »

Quote from: blsnelling on October 17, 2013, 09:53:24 pm

New manual pumps are available on Ebay for $25.

Wow that is cheap enough.

blsnelling · « **Reply #5 on:** October 17, 2013, 10:01:17 pm »

Quote from: fastleo151 on October 17, 2013, 09:56:02 pm

Is the old one fixable?

I don't believe it's serviceable. It's a sealed unit.

fossil · « **Reply #6 on:** October 18, 2013, 03:04:41 pm »

There is a check valve in the pump. It's shown in the P series shop manual. It's located behind the manual oiler nipple on the pump. It's likely not removable but it may be just clogged with dirt and a flushing out might get it going again.
I have both the Pioneer P series for the P41 and up shop manual as well as the Poulan Pioneer (405-655) shop manual if anyone needs copies. They compliment each other.

Cut4fun . · « **Reply #7 on:** October 18, 2013, 03:15:15 pm »

Thats good to know Brad and Thanks for stopping in a sharing with us.

echoshawn · « **Reply #8 on:** October 18, 2013, 03:29:47 pm »

Seriously having to consider selling my 655...

Cut4fun · « **Reply #9 on:** October 18, 2013, 03:30:27 pm »

Just in case you missed the 405 455 525 655 service manual thread. http://chainsawrepair.createaforum.com/poulan/poulan-405-455-525-655/msg14266/#msg14266

Chainsaw Repair

News:

Author Topic: PP 655 Oiler (Read 347 times)

blsnelling

PP 655 Oiler

3000 FPS

Re: PP 655 Oiler

blsnelling

Re: PP 655 Oiler

fastleo151

Re: PP 655 Oiler

3000 FPS

Re: PP 655 Oiler

blsnelling

Re: PP 655 Oiler

fossil

Re: PP 655 Oiler

Cut4fun .

Re: PP 655 Oiler

echoshawn

Re: PP 655 Oiler

Cut4fun

Re: PP 655 Oiler

Related Topics