Author Topic: Poulan Craftsman PP295 4620 358.350203 358350203  (Read 419 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21872
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan Craftsman PP295 4620 358.350203 358350203
« on: August 24, 2015, 10:42:05 pm »
Here is the poulan I was thinking of. It's a 4218 :-[
I do have the craftsman version of what you are looking for but its black. Would you be interested?

David

Dave just interested to know what the model number is of the craftsman?  I dont recall seeing a 295 4620 in black craftsman  local.
REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21872
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan Craftsman PP295 4620 358.350203 358350203
« Reply #1 on: August 24, 2015, 10:48:23 pm »
Here is the poulan I was thinking of. It's a 4218 :-[
I do have the craftsman version of what you are looking for but its black. Would you be interested?

David

Dave just interested to know what the model number is of the craftsman?  I dont recall seeing a 295 4620 in black craftsman  local.

Think I found it in a search already 358.350203 358350203

Dang found a red version too.

REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
There are multiple Craftsman variants.  Some black.  Some red.  Some dark green. 

Some have the same engine as the 295/4620, while others have a plated piston and bare bore like a 3400/3800 and most Micros.  Some of the Poulan 2900 versions of these are that way too (Types 3 and 4 IIRC).

I have been accumulating the Craftsman model #'s for these saws.  Think I have about a half dozen of those numbers written down so far.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
guys I have....a couple of them I'll get the numbers off them.  I think the ones I have don't have a chainbrake.  sooo I normally merge them with a h 136 or 141  but they don't have the spring av its tough to make me happy I guess.

David

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
oh also I have never seen one with a bare bore. fwiw

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
I prefer the Husky 36-141 chassis and am swapping these 46cc Poulan engines (and their related intake parts) into them.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
oh also I have never seen one with a bare bore. fwiw

I have a roached P/C from a red Craftsman 358.350203 with a bare bore/plated piston.  When I have time I'll dig up and post the part #'s for the bare bore/plated piston as well as those for the 'normal' plated bore/bare piston parts.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21872
  • Karma: 521
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
I was thinking we need to start a poulan 295 2900 4620 and Craftsman 358.350203 thread to save all this info in.  @Eccentric  Aaron would you start it when you get time as you know these saws.

We have a bunch of separate threads on them. But maybe one to keep all the info of what they are in one.
REDNECK Saw Repair Getter Done

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
I was thinking we need to start a poulan 295 2900 4620 and Craftsman 358.350203 thread to save all this info in.  @Eccentric  Aaron would you start it when you get time as you know these saws.

We have a bunch of separate threads on them. But maybe one to keep all the info of what they are in one.

Will do Kevin.  It'll cover the 2500-3050 Poulans. the Poulan Pro 255-315, and the Craftsman variants.  That's a lot.  Will briefly mention the Pioneer/Partner and Jonsered variants (and the Husky 36-142 cousins), but will leave the bulk of that info to threads in their respective sections.  In the Poulan/PP thread I'll limit the info covering the other variants to what's shared between them and the Poulans.

I'll also do a thread the next time I build a 46cc Poulvarna from a PP295/4620 and a Husky 36-141.  Will do that one in the Husky section.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline David Young

  • 5 cube
  • ***
  • Posts: 133
  • Karma: 16
So I don't know how these fit in. I found three that had serial number tags years 1995-97. I tried with the pics but they are too large and its a pain to down size them on my phone.

One is 358.351190
The other two are
358.351191

What's the difference between them
David

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
333 Views
Last post October 18, 2012, 04:02:23 pm
by Cut4fun .
Poulan 4620

Started by Cut4fun « 1 2 ... 6 7 » Poulan

64 Replies
1424 Views
Last post September 09, 2018, 11:33:48 am
by Cut4fun .
18 Replies
418 Views
Last post January 25, 2014, 08:03:36 am
by The Ripper
13 Replies
395 Views
Last post March 26, 2017, 03:06:09 pm
by Revpop
4 Replies
333 Views
Last post January 04, 2015, 11:28:15 am
by Philbert
9 Replies
189 Views
Last post February 04, 2015, 12:37:31 pm
by Cut4fun .
7 Replies
217 Views
Last post August 27, 2015, 10:13:48 am
by Cut4fun .
12 Replies
350 Views
Last post February 18, 2016, 07:45:29 pm
by dannyupsolate
5 Replies
371 Views
Last post June 08, 2016, 10:22:51 pm
by leec
10 Replies
309 Views
Last post April 27, 2016, 02:22:24 pm
by deezlfan