Author Topic: Replacement Bar - Poulan 3450  (Read 334 times)

0 Members and 0 Guests are viewing this topic.

Offline rockfishon

  • 4 cube
  • **
  • Posts: 59
  • Karma: 8
Replacement Bar - Poulan 3450
« on: October 19, 2014, 03:29:04 pm »
Ok, now that the tank was replaced, I ran some trees through the old saw.  Just at the end, the end sprocket on the original bar **** in half.  Looks like I need a new bar along with everything else I have done.  Starting to second guess fixing an old saw.  Anyway, looking for advise on what 20" bar should I go with on a 1998 Poulan 3450?

Share on Facebook Share on Twitter


Offline rockfishon

  • 4 cube
  • **
  • Posts: 59
  • Karma: 8
Re: Replacement Bar - Poulan 3450
« Reply #1 on: October 20, 2014, 04:25:25 pm »
So I am leaning towards the Oregon Intenz bar.  It seems to have an adjustment built in.  Does it work well to tighten the chain or is it gimick that keeps getting looser?

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Replacement Bar - Poulan 3450
« Reply #2 on: October 20, 2014, 06:11:40 pm »
Intenz bars have been around a while they are not new.

They work pretty good for a saw with a bad adjustment mechanism

But the Intenz adjustment mechanism is not considered a robust adjustment system but should last if you are careful with it.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22068
  • Karma: 547
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Replacement Bar - Poulan 3450
« Reply #3 on: October 21, 2014, 12:45:30 pm »
I run the 20" intentz bars with the regular adjusters.  If you loose the regular tensioner you can fall back on the intentz bar. Most of them I seen are 70 drive link bars. 
You can also convert a K095 small husky bar 72 drive link to work on the poulan K041 mount. Slotting bar adjuster oils and elongate till oil can pass through same hole.
REDNECK Saw Repair Getter Done

Offline rockfishon

  • 4 cube
  • **
  • Posts: 59
  • Karma: 8
Re: Replacement Bar - Poulan 3450
« Reply #4 on: October 23, 2014, 06:43:52 pm »
So I ended up with a oregon 200sldk041 bar and a 72lpx070g chain.  They seem to fit. 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22068
  • Karma: 547
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Replacement Bar - Poulan 3450
« Reply #5 on: October 23, 2014, 06:53:51 pm »
Yes 70dl 72lgx would be correct. 

bar  http://www.treestuff.com/store/catalog.asp?item=15


copy paste

   

This bar uses 70 drive links of 3/8" pitch by .050" gauge chain such as Oregon 72LGX70.
This bar has an 11 tooth sprocketnose tip

 

Fits the following chainsaws:  MANY not listed. Some IMO shouldnt be listed.  ???

Allis Chalmers 65, 75

Cub Cadet CS3916

Dayton 2Z753, 2Z760, 2Z970, 4Z022, 4Z023, 4Z109, 4Z573,6Z284, 6Z823

Dolmar 100, 101, 102, 103, 104, 105, 106, 108, 200, 260, 270, 290,ES-161, ES-171, PS-34, PS-340, PS-341, PS-400, PS-401, PS-3300th

Echo CS-280, CS-290, CS-300, CS-301, CS-302 (AFTER #0015304), CS-302S, CS-305, CS-306, cs-310, CS-315, CS-330, CS-330T, CS-341, CS-346, CS-351 (AFTER #0112195), CS-360T, CS-370, CS-3000, CS-3400, CS-3450, CS-400, ECS-2000, ECS-3000, PPT-265C

Efco 132S, MT 3600, MT 3700, MT 4000

Green Machine 7100, 7200, 7400

Homelite 20, 20AV, 23AV, 3300, 3350, 3800, 3850, d3350b, d3850b, i3350b, PS33, UT10901, UT10901A, UT10926, UT10942, UT10947, z3350 z3850; HOMELITE PRUNERS: UT15520A, Expand-it attachment FOR 4 and 98-101

Husqvarna 23, 36, 41, 136, 137, 141, 142, 235, 240, 243, Electric 16

John Deere 25EV, 28, 28V, 30, 30V, 35EV, 40V,45EV, 46EV, 200CS, 230CS, 300S, 450V; JOHN DEERE PRUNERS, Quick-tatch series: PS2383, PS2683, PSA10

Jonsered 2014, 2016, 2035, 2036, 2036 TURBO, 2037, 2040, 2040 TURBO, 2041, 2045, 2050, 2050 TURBO, 2054, 2135, 2137, 2138, 2141, 2145, 2150, 2152, 2152W

Makita DCS34, DCS330S, DCS340, DCS341, DCS390, DCS390S, DCS400, DCS401, 5012B, 5014NB, 5016NB, UC3500, UC4000

McCulloch MS 4016P, MS 4018P

Poulan/Poulan PRO 25A, 180, 190, 200, 205, 210, 220, 221, 225, 230, 235, 236, 240, 255, 260, 285, 295, 305, 306SA, 310, 315, 335, 336, 365, 1220, 1420, 1425, 1625, 1800, 1950, 2000, 2050, 2055, 2100, 2150, 2155, 2175, 2250, 2300, 2350, 2400, 2450, 2500, 2550, 2600, 2700, 2750, 2775, 2800, 2900, 3000, 3050, 3100, 3300, 3500, 3600, E14E, E16E, ELECTRIC PRO 400E, MICRO 25 (XX SERIES AND XXV SERIES), MICRO 25PS, PATRIOT 1900, S25, S35, WILDTHING, WOODSHARK; POULAN POLESAWS: PP 445, PP 5000P (attachment)

Powerhorse 190500, 190501

Red Max G250, G300AVS, G300TS, G310TS, G2500, G3100, GZ4000

Sears 3400, 3401, 3402, 3403, 3407, 3411, 3412, 3414, 3415, 3416, 3417, 3425, 3445, 3455, 3470, 3471, 3476, 3481, 34115, 34116, 35025, 35027, 35028, 35060, 35080, 35082, 35091, 35093, 35095, 35096, 35119, 35202, 35203, 35205, 35206, 35207, 35209, 35215, 35216, 35219, 35224, 35231, 35232, 35235, 35238, 35255, 35256, 35363, 35504, 35505, 35506, 35507PS, 35508, 35512, 35514, 35515, 35516, 35586, 35607, 35628, 35633, 35713, 35714, 35717, 35718, 35736, 35824, 35841, 35886, 36010, 36012, 36015, 36017, 36080, 36082, 36085, 36087, 351040, 351140, 352680, 358341040, 358350670, 358350810, 358.351610, 358360360, 358360380; SEARS POLESAW: 79245

Shindawa (SDK) 90, 100, 104P, 110, 120, 140, 150 ELECTRICS, 160, 180, 285, 300, 300S, 345, 350, 352, 357, 360, 366, 377, 400, 415, 416, 446, 450, 451, 488, 500, E305AV

Skil 1620, 1622, 1624, 1631 Type 3, 1634, 1635, 1636

Snapper S1634, S1838

Solo 635, 636, 637

Tanaka ECS-35, ECS-290, ECS-300, ECS-320, ECS-330, ECS-350, ECS-351, ECS-355, ECS-356, ECS-370, ECS-405, ECS-415, ECS-3301, ECS-3351, ECS-3500, ECS-4000, ECS-4501; TANAKA PRUNERS: TPS-200 attachment, TPS-250, TPS-270, TPS-2510

Tensen MINI BRUTE

Toro 51100, 51140

Western Auto WIZARD MODELS, 010, 012, 014, 110, 112, 212, 214, 316, 14AV, 16AV, CAT 12, 14, ELECTRICS 1800, 2000, S25DA
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
Poulan 330 3450

Started by Cut4fun . « 1 2 ... 33 34 » Poulan

330 Replies
10063 Views
Last post March 03, 2020, 03:15:53 pm
by Cut4fun .
3 Replies
359 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
Poulan 3450 60cc

Started by Cut4fun . « 1 2 ... 6 7 » Poulan

66 Replies
1398 Views
Last post February 08, 2018, 07:01:11 pm
by 3000 FPS
13 Replies
316 Views
Last post October 05, 2014, 11:23:57 pm
by 3000 FPS
Poulan 3450 Carb issues

Started by rockfishon « 1 2 ... 7 8 » Poulan

77 Replies
1094 Views
Last post August 27, 2015, 07:55:47 pm
by Eccentric
111 Replies
1318 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
16 Replies
303 Views
Last post May 17, 2015, 10:00:49 am
by Cut4fun
18 Replies
256 Views
Last post March 22, 2015, 09:43:31 pm
by 3000 FPS
2 Replies
185 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
8 Replies
221 Views
Last post June 05, 2015, 09:52:30 am
by Cut4fun .