Author Topic: Poulan S25 crank seal  (Read 754 times)

0 Members and 0 Guests are viewing this topic.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: S-25 crank seal
« Reply #10 on: January 14, 2013, 06:05:04 pm »
Does your interchange book have a CR # for a Poulan 530019059?  That's a seal for a Micro series saw.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: S-25 crank seal
« Reply #12 on: January 14, 2013, 10:36:08 pm »
I do not understand how the cross reference works on the link you gave.     I have Poulan 475 I am trying to find the clutch side seal part# 503422201.   Now how do I cross reference that number to something else? 
PP 505, 475, 445.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4471
  • Karma: 274
  • Location: Carpenter, Wyoming
Re: S-25 crank seal
« Reply #14 on: January 14, 2013, 11:05:08 pm »
Well I guess it does not reconize Poulan part numbers.  Thanks for showing.
PP 505, 475, 445.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2753
  • Karma: 170
Re: S-25 crank seal
« Reply #15 on: January 15, 2013, 04:49:02 am »
Well that's a lot easier than leafing through a book they weighs 20 pounds .
Like Like x 1 View List

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: S-25 crank seal
« Reply #16 on: January 15, 2013, 05:02:57 am »
http://www2.chicago-rawhide.com/popup_parts_lookup_457012.htm

The 530019051 seal doesn't come up with a hit, but I did get a hit for the 530019059 seal for the Poulan Micros.  Had to search as "19059" without the "5300" prefix.  Same trick didn't work for the 19051 seal.

The SKF # for the Poulan 530019059 is 4913.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2753
  • Karma: 170
Re: S-25 crank seal
« Reply #17 on: January 15, 2013, 07:38:09 pm »
It's possible the s-25  number may have been superceded by another .Does anyone have the Husqvarna number on that seal ?

Offline Chris J.

  • 4 cube
  • **
  • Posts: 45
  • Karma: 3
  • Chainsaw Hoarder & Tinkerer
  • Location: Inescapeable abyss, Texas
Re: S-25 crank seal
« Reply #18 on: January 16, 2013, 10:03:54 am »
It's possible the s-25  number may have been superceded by another .Does anyone have the Husqvarna number on that seal ?

I have no idea, but maybe one these IPLs will be useful.

http://www.barrettsmallengine.com/husqvarna/chainsawpartslist.html
I'm a chainsaw hoarder & tinkerer.  The brand isn't usually important,  if the price is right I'll probably buy it.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: S-25 crank seal
« Reply #19 on: January 16, 2013, 03:42:23 pm »
It's possible the s-25  number may have been superceded by another .Does anyone have the Husqvarna number on that seal ?

Al the 530019051 seal is still available through Poulan and Husqvarna parts outlets.

Edit:

I just realized that you were talking about the possibility of a newer Husqvarna # that we may be able to use in the cross-ref books and sites.
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
459 Views
Last post July 19, 2011, 03:05:26 pm
by Al Smith
6 Replies
1629 Views
Last post March 09, 2012, 06:30:02 pm
by Cut4fun .
5 Replies
290 Views
Last post December 31, 2012, 04:26:16 pm
by Cut4fun
3 Replies
213 Views
Last post February 13, 2014, 11:21:23 pm
by Eccentric
111 Replies
1318 Views
Last post September 27, 2015, 09:41:29 pm
by 3000 FPS
1 Replies
196 Views
Last post August 29, 2016, 05:07:18 am
by Al Smith
9 Replies
188 Views
Last post December 30, 2018, 09:08:12 am
by Al Smith
1 Replies
123 Views
Last post February 13, 2018, 06:51:07 am
by Cut4fun .
7 Replies
172 Views
Last post June 29, 2019, 11:35:54 am
by The Ripper
2 Replies
108 Views
Last post January 22, 2020, 03:55:45 pm
by ENTS