« previous next »
Pages: 1 [2]   Go Down

Author Topic: Small poulan fuel line  (Read 8103 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24222
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Small poulan fuel line
« Reply #10 on: April 30, 2014, 01:22:30 pm »
Even though I know what size I use in these other poulans. I thought I would post what OEM says so it might help some others out if needed.

poulan 2700, 2800, 3000, 3100, 3300, etc, fuel line.

POULAN OEM 530069216 FUEL LINE KIT 3/16 OD X 3/32 ID

The fuel line kit is 530069216, which supercedes a large number of part numbers including 530021023, 530021025, 530021026, 530021027, 530021035, 530021042, 530021067, 530021093, 530069655, 530069664, and 530069751.

 
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Small poulan fuel line
« Reply #11 on: April 30, 2014, 01:44:53 pm »
Cut4fun and I are lucky. We go to the local junk store (we call it the Mall) and there are rolls of Tygon F-4040A and we buy a few feet of the size that looks about right. This happens to be the 3/16 X 3/32. We buy a little of the other sizes too just in case? We keep Tygon on hand for when ever the need occurs.

A friend called this morning telling me that he just bought a bar and chain for his chainsaw at the mall.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 24222
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Small poulan fuel line
« Reply #12 on: April 30, 2014, 02:23:41 pm »
The chain I sharpened for a guy that was bought at the Shelby Mall Jim was forester 3/8.  Maybe all the chain they sale is this brand?
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Small poulan fuel line
« Reply #13 on: April 30, 2014, 02:34:06 pm »
It think most of what they have comes from Stens?

The guy that I talked to on the phone today said the bar was a GB .058. He didn't mention what the chain was. I know they have rolls of chain but I never bought any bars or chains there. Our friend has bought several at the mall.

I know the carb kits are Stens and I think the bars from Stens are Foresters? Silver Steak chain?

You never know about that place as he buys out surplus inventory at times.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dynodave

  • 4 cube
  • **
  • Posts: 35
  • Karma: 3
  • Location: Hamilton MASS USA
    • AGTS
Re: Small poulan fuel line
« Reply #14 on: April 30, 2014, 06:00:34 pm »
McMaster Carr carries tygon 4040a fuel line
I have most of the sizes up to 3/8...for lawn mowers and my British bikes.

These 2 are for my saws. I get 25' at a time.
5/64"   9/64"   1/32"   5552K43   $0.82/ft
3/32"   3/16"   3/64"   5552K22   $0.75/ft
If the tank hole is a bit big the you can use a barbed union to swell the line. I think this was SOP on poulan micro XXV/1800/2000/2300 etc.
union pn 530023877 or rotary 13448 less than a buck.

Logged
32 saws
ECHO-HOMELITE-HUSQVARNA-McCulloch-PIONEER-POULAN-STHIL

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2117
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northwestern Wyoming
Re: Small poulan fuel line
« Reply #15 on: April 30, 2014, 11:58:07 pm »
Quote from: dynodave on April 30, 2014, 06:00:34 pm
McMaster Carr carries tygon 4040a fuel line
I have most of the sizes up to 3/8...for lawn mowers and my British bikes.

These 2 are for my saws. I get 25' at a time.
5/64"   9/64"   1/32"   5552K43   $0.82/ft
3/32"   3/16"   3/64"   5552K22   $0.75/ft
If the tank hole is a bit big the you can use a barbed union to swell the line. I think this was SOP on poulan micro XXV/1800/2000/2300 etc.
union pn 530023877 or rotary 13448 less than a buck.



The double barb fitting on the Micros lived above the tank (just outside of it).  There's a little recess to hold it in place.  The fitting is there to allow you to take the tank and left side cover off to service the starter and such. 

The fitting does also do quite well in the manner that you describe (passing partially through the tank hole to swell the line and lock it in place).  I used one when I put an earlier style vent setup on my PP330.
Logged
Pages: 1 [2]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
20 Replies
8530 Views 		Last post January 29, 2024, 02:44:18 pm
by Cut4fun .
2 Replies
1441 Views 		Last post March 28, 2012, 12:27:35 pm
by nmurph
11 Replies
3368 Views 		Last post October 30, 2016, 09:16:26 am
by Sty57
6 Replies
2647 Views 		Last post January 11, 2013, 05:01:34 pm
by Cut4fun .
2 Replies
1556 Views 		Last post August 26, 2013, 01:39:22 pm
by Bluegill
163 Replies
17712 Views 		Last post August 01, 2024, 07:52:16 am
by Cut4fun .
38 Replies
4217 Views 		Last post November 30, 2015, 03:40:50 pm
by dynodave
25 Replies
3140 Views 		Last post November 07, 2015, 07:25:01 pm
by treeslayer2003
11 Replies
2115 Views 		Last post June 08, 2016, 01:58:07 pm
by Cut4fun
12 Replies
2116 Views 		Last post June 10, 2019, 10:46:53 am
by AmericanPsycho