« previous next »
Pages: [1] 2 3 4 5   Go Down

Author Topic: Snapper S1838..same as Poulan 1838?  (Read 1912 times)

0 Members and 0 Guests are viewing this topic.

Offline dodge

  • 3 cube
  • *
  • Posts: 11
  • Karma: 0
Snapper S1838..same as Poulan 1838?
« on: April 16, 2013, 08:49:43 pm »
The Snapper's fuel lines have disentagrated. Not sure where all the lines connect to....Has a Walbro WT624 carb, but havent been able to locate any fuel line diagrams etc. Any help would be greatly appreciated!!!

thanks
Logged

Share on Facebook Share on Twitter

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23417
  • Karma: 662
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Snapper S1838..same as Poulan 1838?
« Reply #1 on: April 16, 2013, 09:12:06 pm »
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Snapper S1838..same as Poulan 1838?
« Reply #2 on: April 16, 2013, 09:38:35 pm »
Been there and done that a few times. Good thing I was familiar with the Walbro and Zama carbs and what fitting on them did what or I would have been as lost as Hogan's goat. I also had to compare hose barb sizes.  Most of these were like Homelight, Ryobi, McCulloch, and Weed Eater weed whip affairs.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline dodge

  • 3 cube
  • *
  • Posts: 11
  • Karma: 0
Re: Snapper S1838..same as Poulan 1838?
« Reply #3 on: April 16, 2013, 11:45:42 pm »
660Magnum: could you expand a little on which hoses go where? These are the ones I know of: 1 main hose on the right side coming from the tank connecting to barb on upper right of carb. 1 hose which was inserted into the back of the head in a small opening....was told this was a pulse hose..not clear where this one goes. 2 hoses come out of the purge bulb...I've attached the "suck" hose to the barb on the lower left of the carb and the other, the pressure side of the bulb has a hose that goes into an opening into the tank on left side of the tank. I think those are correct..just need to know where this "pulse" line from the cyl head connects to. When pull starting the engine, lots of gas is pulled up through that main hose from the tank and is flooding the carb severely..

help...anyone have a detailed hose diagram??

thanks!!
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Snapper S1838..same as Poulan 1838?
« Reply #4 on: April 17, 2013, 10:28:24 am »
Some pictures would be worth a thousand words on your part.

Pictures of the carb would help most as we could identify which outlets are what.

The impulse port on the carb goes directly to the outside of the pump diaphragm. On most carbs it is connected to a right angle barb in the cover of the carb. But on Walbro HD series carbs is in the side adjacent to the pump inlet barb.

The outlet to the primer comes from the metering valve or regulator side of the carb. This hole will suck air if left open and ther engine will not run. You primer bulb assembly has a check valve inside that prevents the sucking of eye.

It sounds to me that you have almost figured everything out and you just need a little reassurance? 
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23417
  • Karma: 662
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Snapper S1838..same as Poulan 1838?
« Reply #5 on: April 17, 2013, 12:40:44 pm »
I can take pics of a 2150 or  2375  carb  with oem lines attached still.


Logged

Offline dodge

  • 3 cube
  • *
  • Posts: 11
  • Karma: 0
Re: Snapper S1838..same as Poulan 1838?
« Reply #6 on: April 17, 2013, 07:24:51 pm »
Cut4Fun, that would be great! Heck, just a description of how/where the hoses all connect would supergood.

thanks
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23417
  • Karma: 662
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Snapper S1838..same as Poulan 1838?
« Reply #7 on: April 17, 2013, 07:52:50 pm »
Quote from: dodge on April 17, 2013, 07:24:51 pm
Cut4Fun, that would be great! Heck, just a description of how/where the hoses all connect would supergood.

thanks

My old feeble mind would forget from the barn to the house.  Pics are worth 1000 words. Got any pics of your saw and carb area?
Logged

Offline dodge

  • 3 cube
  • *
  • Posts: 11
  • Karma: 0
Re: Snapper S1838..same as Poulan 1838?
« Reply #8 on: April 17, 2013, 08:50:25 pm »
Will try and get some pics on the board manana.

thanks
Logged

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23417
  • Karma: 662
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Snapper S1838..same as Poulan 1838?
« Reply #9 on: April 18, 2013, 04:45:28 pm »
Poulan 1950 carb line pics. Hope you can see enough detail to tell where each goes to the tank, vent and primer.










Logged
Pages: [1] 2 3 4 5   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
Poulan 475

Started by Cut4fun « 1 2 ... 35 36 » Poulan

355 Replies
47448 Views 		Last post November 18, 2022, 07:43:07 am
by Cut4fun .
Poulan 220

Started by Cut4fun . « 1 2 » Poulan

17 Replies
1654 Views 		Last post June 17, 2017, 12:25:32 pm
by Cut4fun .
Poulan 365

Started by Cut4fun « 1 2 ... 16 17 » Poulan

169 Replies
8815 Views 		Last post January 31, 2018, 07:59:31 pm
by stubnail67
7 Replies
919 Views 		Last post April 13, 2014, 08:11:42 pm
by Cut4fun .
4 Replies
1032 Views 		Last post November 23, 2012, 12:28:15 am
by Andyshine77
23 Replies
2663 Views 		Last post November 02, 2015, 04:36:50 pm
by Cut4fun .
poulan saw

Started by Jay Poulan

2 Replies
374 Views 		Last post May 24, 2013, 05:07:22 pm
by Cut4fun .
4 Replies
225 Views 		Last post June 26, 2014, 12:13:31 pm
by mowertech
0 Replies
414 Views 		Last post February 06, 2018, 09:03:56 am
by Cut4fun .
0 Replies
425 Views 		Last post February 06, 2018, 09:04:57 am
by Cut4fun .