Author Topic: Super 380 or 330  (Read 418 times)

0 Members and 0 Guests are viewing this topic.

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Super 380 or 330
« on: February 25, 2014, 08:56:25 am »
Well seems like I have missed out a lot on this line of saws, so I decided to join in on the fun.  Were the 380 the only ones to have the yellow tanks?  I will have to see how bad the cylinder is on this one, but I have a new 038 mag cylinder that may replace it.  Also anyone have any of the missing pieces for this one?  Thanks

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Super 380 or 330
« Reply #1 on: February 25, 2014, 01:07:11 pm »
I'm not 100% sure, but the poulan 380 is the only one of that style I have seen with yellow tank.    What does the sticker say on the tank back right side?

Looks like you have more parts then the 60cc 3450 I am working on very very slowly.  :-X
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Super 380 or 330
« Reply #2 on: February 25, 2014, 01:08:01 pm »
Oh pop the cylinder cover. The cylinder fins will tell you 54cc or 60cc easily.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Super 380 or 330
« Reply #3 on: February 25, 2014, 01:09:59 pm »
60cc left,   54cc right



REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Super 380 or 330
« Reply #4 on: February 25, 2014, 01:18:51 pm »
REDNECK Saw Repair Getter Done

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Super 380 or 330
« Reply #5 on: February 25, 2014, 01:44:54 pm »
Thanks Kevin, I couldn't zoom in enough on the sticker to make anything out.  I won't have it until friday.  I seen 3000's 3750 video he did on his ported 3750, but if this cylinder is bad, I think the 038 mag is goin on.  I might of gave too much for a parts machine but i didn't think it was is a bad gamble on a 380, unless of course its way worse than I think it is.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Super 380 or 330
« Reply #6 on: February 25, 2014, 02:04:47 pm »
So it was you who outbid my token bid eh?   Glad somebody here got it.8)
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21952
  • Karma: 535
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Super 380 or 330
« Reply #7 on: February 25, 2014, 02:06:19 pm »
Looks like a fair price $60 with free shipping.  Topend worth that if good.
REDNECK Saw Repair Getter Done

Offline Tractorsaw1

  • 6 cube
  • ****
  • Posts: 183
  • Karma: 25
  • Location: SHOW ME MO
Re: Super 380 or 330
« Reply #8 on: February 25, 2014, 02:17:38 pm »
I thought i was the only one who bid on it, figuring i really was crazy ;D  I bid with a couple of hours left, thinking well i prolly won't get it & had to go somewhere.  I figured best case would need a piston, rings, recoil, muffler front, air filter & cover, & seals, my my those part saws get kinda expensive pretty fast, but when there up & running good, you tend to forget all those small trinket part orders that kinda added up - priceless.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Super 380 or 330
« Reply #9 on: February 25, 2014, 02:38:08 pm »
Actually now that I think about it...........I may have just had that one in my 'watch' list and intended to bid (but forgot to do so before it ended).  No biggie.  I don't need another project.  I do like the yellow tank Super 380 look the best of that series....

-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

 

Related Topics

  Subject / Started by Replies Last post
5 Replies
400 Views
Last post July 14, 2016, 08:22:07 pm
by Cut4fun .
3 Replies
517 Views
Last post September 06, 2016, 10:15:43 pm
by Fishnuts2
2 Replies
414 Views
Last post May 22, 2017, 04:40:07 pm
by Big_6
0 Replies
89 Views
Last post June 09, 2017, 02:17:42 pm
by dpjones
4 Replies
199 Views
Last post March 17, 2018, 12:07:25 pm
by Cut4fun .
5 Replies
279 Views
Last post March 21, 2019, 07:04:12 am
by waltergorman
0 Replies
73 Views
Last post March 24, 2019, 11:06:02 am
by Cut4fun .
5 Replies
132 Views
Last post October 22, 2019, 11:24:43 pm
by farmboy
0 Replies
45 Views
Last post April 23, 2020, 01:10:19 pm
by Cut4fun .
0 Replies
18 Views
Last post June 25, 2020, 09:39:20 am
by Cut4fun .