Author Topic: Test in 11" dry ash 3450 380 3750 036  (Read 1252 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #10 on: October 19, 2017, 08:36:07 am »
What part are you looking for?
Shep

Who?  Me nothing.

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #11 on: October 19, 2017, 09:06:03 pm »
I was just taking stock of parts yesterday for a guy to see if I had a extra part for his saw.  Think I have enough to build 4 more 330 3450 or 2 3750 380 and 1 365 or 336 

Starting to get short on some parts so couldnt help him out right now.
This guy.
Shep
Useful Useful x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #12 on: October 20, 2017, 08:26:21 am »
I was just taking stock of parts yesterday for a guy to see if I had a extra part for his saw.  Think I have enough to build 4 more 330 3450 or 2 3750 380 and 1 365 or 336 

Starting to get short on some parts so couldnt help him out right now.
This guy.
Shep

I had 3 with covers but none I could let go. I dont think they are a big deal though.

Noise seal that goes around the air filter cover on 330 etc.  #44 530049739  Sound Strip

poulan pro 330 IPL http://s30387.gridserver.com/partsDiagrams/Poulan%20Pro%20330.pdf

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 150
  • Location: Hayesville, NC
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #13 on: October 20, 2017, 09:04:53 pm »
No spares.  Just thought I might help.
Shep
Like Like x 1 View List

Offline drumbum

  • 4 cube
  • **
  • Posts: 48
  • Karma: 10
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #14 on: October 21, 2017, 10:08:00 am »
No spares.  Just thought I might help.
Shep
Hey shep, I was curious if you had any Husqvarna practica 44 cylinders left?

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #15 on: November 13, 2017, 08:38:56 pm »
The type 3 3450 60cc in video with first few cuts sold today.
Guy from where I used to work tested out some saws and wanted this one even though she is on first tank.  Told him it will only get stronger in the cuts once she gets some time on her. 
Left happy considering the tell he told me of some other saws he tested out before stopping by.  Said they wouldnt even cut a 2" limb. = chain IMO  :D   I put him on the butt end of a dry hard ash to test in. All smiles.   ;)
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #16 on: December 05, 2017, 11:29:14 am »
After learning info on the 262's the one I compared to my 3750 years back was the turd of the 262 line. It was the mahle cylinder with decomp which I have found out the weakest of the 3 cylinders offered. Also had the small HDA-120 carb.

So this new 262 with big HDA-87 carb and the best K&S cylinder I think I will see a difference when I compare them.

The 380 has some port work done and the stock T3 60cc isnt here anymore as it was sold as was the 036. But the 036 suppose to come in soon.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23976
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Test in 11" dry ash 3450 380 3750 036
« Reply #17 on: December 06, 2017, 05:58:03 pm »
SOG the video on the 380 I turned on when I thought I was turning it off. So no video. Fubarred it.

But timing the 036 that is muffler modded and broke in cut quicker then the 262 not broke in and all stock that is still on first tank and only started and cut with 4 times for a few cuts each now.  380 even with mild port work and gasket delete still didnt feel as strong in the cuts as above 2 but cut right there too IMO. But is stronger then stock 60cc.
Ash was used.

Just look at the 036 380 video above to see how the 380 cut.

Just adding the 262xp video here too.

Cutting dry ash in the dark so not good video. Pushing pretty good in the cuts. New rebuild breaking in on 1st tank still.   Forgot to strap the dang log down. 

https://youtu.be/4USzL58JCqc

 

Related Topics

  Subject / Started by Replies Last post
16 Replies
3371 Views
Last post April 11, 2014, 07:03:51 am
by Tractorsaw1
120 Replies
6565 Views
Last post October 07, 2023, 08:09:15 am
by Cut4fun
2 Replies
691 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
2 Replies
531 Views
Last post September 28, 2015, 12:40:53 pm
by Cut4fun .
4 Replies
532 Views
Last post November 22, 2015, 11:58:01 am
by Cut4fun .
1 Replies
804 Views
Last post April 11, 2017, 01:43:42 pm
by Cut4fun .
18 Replies
1549 Views
Last post September 26, 2024, 10:24:53 am
by Cut4fun .
0 Replies
484 Views
Last post August 31, 2018, 06:26:35 pm
by Cut4fun .
0 Replies
240 Views
Last post March 03, 2022, 10:55:02 am
by Cut4fun .
1 Replies
127 Views
Last post February 03, 2024, 10:57:09 am
by Cut4fun