Author Topic: Poulan 3450 Badboy Tim Allen TA BB  (Read 2119 times)

0 Members and 0 Guests are viewing this topic.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Poulan 3450 Badboy Tim Allen TA BB
« on: January 19, 2013, 09:24:46 pm »
First one of these I have ever saw. Poulan 3450 TA edition bad boy. 

Just noticed looking at pics it has a black tank instead of geen one like on the TA 3750 badboy.

Poulan 3.3  Tim Allen Bad Boy 3450

REDNECK Saw Repair Getter Done

Share on Facebook Share on Twitter


Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #1 on: January 20, 2013, 08:56:37 am »
Sweet!  Didn't know they made that version.  From the IPL it shows purple covers I just assumed it was because it fits a 3750 too.
Shep
Like Like x 1 View List

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #2 on: January 20, 2013, 12:26:36 pm »
It has it marked 3450 on both the starter and clutch cover, so there is no swapping from a 3750.  Never seen one either.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #3 on: January 20, 2013, 08:30:22 pm »
The tank decal sez 3450 (and  "2" to the right of the SN) as well as "54cc", so it's actually a 54cc saw instead of one of the 61cc 3450 T3's.  When I saw Marc's ad I was hoping the decal was going to have "3" next to the SN and "61cc" instead.  Oh well.  I don't "need" to go after yet another saw right now anyways..... ;D
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #4 on: January 20, 2013, 08:35:43 pm »
The tank decal sez 3450 (and  "2" to the right of the SN) as well as "54cc", so it's actually a 54cc saw instead of one of the 61cc 3450 T3's.  When I saw Marc's ad I was hoping the decal was going to have "3" next to the SN and "61cc" instead.  Oh well.  I don't "need" to go after yet another saw right now anyways..... ;D

I hear ya, and I already have I think 3, 3450's and really do not need another unless of course the price was right.  Now if it was a 3750 it would have been gone.
PP 505, 475, 445.

Offline Eccentric

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2110
  • Karma: 217
  • Magnesium and Iron.
  • Location: Northern California.
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #5 on: January 20, 2013, 08:53:04 pm »
I hear ya, and I already have I think 3, 3450's and really do not need another unless of course the price was right.  Now if it was a 3750 it would have been gone.

Yep.  I have a nice PP330 (although I'm STILL waiting on backordered parts for it from Baileys.......GRRRR).  Would like to land a nice 3750,  PP380, or 3450 T3 to run alongside the 330.  If I can get a 3450/PP330 cheap enough to make buying a new PP380 top end for it, then that'd be cool too.:D
-Aaron

For older saws:
Tune the H side so that it 4-strokes (burbles) at WOT unloaded and just cleans up when under load.
When you lift cutting load, the saw should immediately revert to 4-stroking.  Fine tune the transition point for the wood you're cutting.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #6 on: January 25, 2013, 10:12:41 pm »
Guess I am the new owner of a 3450 bad boy.  Still never seen one or finding much info.

You know what I have in her and  you know where she is at if anyone wants her in in their collection down the road.

  I just cant stand seeing it not make it to a poulan collector someday. 
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #7 on: January 25, 2013, 10:38:09 pm »
Alright for you.   I thought the saw was pretty cool but just to many irons in the fire right now.  Like you said down the road I know where it is.
PP 505, 475, 445.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21876
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #8 on: January 25, 2013, 10:43:29 pm »
I honestly can not find another pic of a 3450 TA BB  ???  All kinds of 3750 TA BB's I never saw before though in my searching.

I was hoping fastleo would buy the saw but he was afraid of all that purple.  ;)
REDNECK Saw Repair Getter Done

Online 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4459
  • Karma: 273
  • Location: Carpenter, Wyoming
Re: Tim Allen 3450 Poulan Bad Boy
« Reply #9 on: January 25, 2013, 11:17:22 pm »
I like all the purple especially when cutting with my BIL and he has his stihls out there and I am cutting circles around him.   He just shakes his head at me because of the purple.   It is like real chainsaw guys do not have purple saws.
PP 505, 475, 445.

 

Related Topics

  Subject / Started by Replies Last post
242 Replies
7768 Views
Last post March 23, 2020, 06:17:53 pm
by Cut4fun .
Poulan 330 3450

Started by Cut4fun . « 1 2 ... 33 34 » Poulan

330 Replies
9930 Views
Last post March 03, 2020, 03:15:53 pm
by Cut4fun .
3 Replies
347 Views
Last post February 03, 2013, 06:33:10 pm
by 660magnum
Poulan 3450 60cc

Started by Cut4fun . « 1 2 ... 6 7 » Poulan

66 Replies
1378 Views
Last post February 08, 2018, 07:01:11 pm
by 3000 FPS
Poulan 3450 Carb issues

Started by rockfishon « 1 2 ... 7 8 » Poulan

77 Replies
1081 Views
Last post August 27, 2015, 07:55:47 pm
by Eccentric
5 Replies
328 Views
Last post October 23, 2014, 06:53:51 pm
by Cut4fun .
2 Replies
179 Views
Last post March 20, 2015, 10:16:41 pm
by 3000 FPS
8 Replies
215 Views
Last post June 05, 2015, 09:52:30 am
by Cut4fun .
Poulan 3450 54cc 60cc

Started by Cut4fun « 1 2 3 4 5 » Poulan

43 Replies
717 Views
Last post November 02, 2015, 10:59:12 am
by Cut4fun .
2 Replies
135 Views
Last post February 28, 2018, 01:25:07 pm
by Cut4fun .