Author Topic: Poulan 46cc Porting Plane conversion (Read 1885 times)

Spruce_Goose · « **Reply #30 on:** August 30, 2014, 09:56:36 am »

"Look at the crank and see if it is shinny in the bearing seat area or galled"

It is kinda shiny. Actually has that kinda glazed brown look, presumably from burnt oil.

660magnum · « **Reply #31 on:** August 30, 2014, 10:38:06 am »

All I know to do is to try a new bearing on the shaft and see if it is tighter?

Cut4fun . · « **Reply #32 on:** August 30, 2014, 11:01:25 am »

Jim the guy that owned the K3500 454 plow truck I looked at Bucyrus airport was getting into rc. Seen them in background in hanger.

He said he crashed a 4 engine

? cant remember plane learning. Now only single engines. I told him if he needed any info text me and I would hook you two up.
He said the guy that taught him to fly them was from Shelby too.

660magnum · « **Reply #33 on:** August 30, 2014, 01:40:43 pm »

OK.

There is a guy in the Galion model airplane club that lives in Bucyrus that flew at the Bucyrus airport for years that could help him also.

Chainsaw Repair

News:

Author Topic: Poulan 46cc Porting Plane conversion (Read 1885 times)

Spruce_Goose

Re: Poulan 46cc Porting Plane conversion

660magnum

Re: Poulan 46cc Porting Plane conversion

Cut4fun .

Re: Poulan 46cc Porting Plane conversion

660magnum

Re: Poulan 46cc Porting Plane conversion

Related Topics