Chainsaw Repair

Seems they made a carving model from a redmax 3200.    http://www.mastersofthechainsaw.com/G3200.htm

http://www.mastersofthechainsaw.com/RedMax.htm

 The original G3200 EZ saw was lightened by leaving off a couple homeowner bells and whistles that carvers would not need and set up with the highest quality carving bar and quarter pitch chain.
…..and so the G3200 CV carver model was born.
Retail price for the RedMax G3200CV carver model with 12 inch carving bar and chain is $379.95 US dollars.

I've kept an eye out for a G3200 for some time, although I don't carve. 

An interesting detail:  Jenn Feng in Taiwan made a McCulloch-branded version of the GZ4000, using their own castings and moldings.  The engine/chassis will swap (although thread pitches are different), but all the plastic parts are just a little different. 

Anyway, they must have lost the license to make the strato or something, because somewhere along the way they started putting out those ugly XM40 multi colored saws, as well as some more normally styled McCulloch versions.  But the chassis were a little different, and after looking at them for a while I realized they were G3200 clones with the strato 40cc engines stuffed in.  They just blocked off the strato ports and put a bigger carb on the case intake.  Top covers were a little taller too.  Even with the strato ports blocked it's still a nice quad, closed transfer cylinder. 

I don't know what they weigh - probably a little more as the engine is likely heavier.

Don't believe Brian has any left for sale. I do have a prototype GZ3500EZ and a production one as well but they are not for sale.

.