Author Topic: falling timber  (Read 448 times)

0 Members and 0 Guests are viewing this topic.

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: falling timber
« Reply #10 on: July 28, 2014, 09:02:39 pm »
Big and open lower transfers like an 084...

Offline mdavlee .

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1968
  • Karma: 171
Re: falling timber
« Reply #11 on: July 29, 2014, 10:07:19 am »
I'm pretty sure he used finger ports in it if I remember right from the old race saws days.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: falling timber
« Reply #12 on: July 29, 2014, 10:20:06 am »
I'm pretty sure he used finger ports in it if I remember right from the old race saws days.

Didnt some new guy try and put a claim and patent on Tom's finger porting.    ::) ;)  :D
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: falling timber
« Reply #13 on: July 29, 2014, 10:46:10 am »
Jr and Sr falling pics

REDNECK Saw Repair Getter Done

Offline JohnG28

  • Piped Saw
  • *****
  • Posts: 315
  • Karma: 27
Re: falling timber
« Reply #14 on: August 10, 2014, 10:57:23 am »
I'm pretty sure he used finger ports in it if I remember right from the old race saws days.

Didnt some new guy try and put a claim and patent on Tom's finger porting.    ::) ;)  :D

Would that be the same guy who was over on the FF trying to take shots at you and Al a while back?  If so he seemed real "special"!   :D

Offline JohnG28

  • Piped Saw
  • *****
  • Posts: 315
  • Karma: 27
Re: falling timber
« Reply #15 on: August 10, 2014, 10:59:17 am »
Nice picture and videos btw.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: falling timber
« Reply #16 on: August 10, 2014, 11:06:10 am »
I'm pretty sure he used finger ports in it if I remember right from the old race saws days.

Didnt some new guy try and put a claim and patent on Tom's finger porting.    ::) ;)  :D

Would that be the same guy who was over on the FF trying to take shots at you and Al a while back?  If so he seemed real "special"!   :D

Yep same idiot. That guy is not even a chit speck on Tom Fales Jr azz.  To put it bluntly.
REDNECK Saw Repair Getter Done

Offline JohnG28

  • Piped Saw
  • *****
  • Posts: 315
  • Karma: 27
Re: falling timber
« Reply #17 on: August 13, 2014, 10:48:20 am »
 :D Yeah he was something else. Seems he's doing real well promoting his crap since I haven't seen him since!

Offline Gypo Logger

  • 3 cube
  • *
  • Posts: 22
  • Karma: 7
Re: falling timber
« Reply #18 on: December 12, 2014, 11:47:01 pm »
Here's an old pic of proper felling techniques.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22584
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: falling timber
« Reply #19 on: December 13, 2014, 09:29:13 am »
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
318 Views
Last post April 07, 2015, 12:21:51 am
by JohnG28
3 Replies
206 Views
Last post September 29, 2015, 10:50:47 pm
by mdavlee .
0 Replies
57 Views
Last post November 21, 2015, 07:05:17 pm
by Cut4fun .