Author Topic: 65cc stock saw testing 10x10 cuts  (Read 2597 times)

0 Members and 0 Guests are viewing this topic.

Offline 1manband

  • Nitro Hotsaw
  • *******
  • Posts: 759
  • Karma: 52
Re: 65cc stock saw testing 10x10 cuts
« Reply #70 on: August 18, 2014, 07:47:32 pm »
solo 665 is strong, but the BMEP numbers say the 6400 makes more torque per each cc.

(actually the most BMEP of any currently offered saw of any cc displacement).

in larger wood than this test, believe it should show the difference in the two.

regards
-joe

-----------------
the ms661 test results showed up on kwf, so will be updating my chart. noticed the above, during the process.


hiatus

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: 65cc stock saw testing 10x10 cuts
« Reply #71 on: August 18, 2014, 10:23:48 pm »
Be cool to compare the two. 

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: 65cc stock saw testing 10x10 cuts
« Reply #72 on: August 19, 2014, 11:39:45 am »
Tim didnt Dex say the broke in stock 562 with about 50 tanks through it cut in the 9-10 second range in same cant during his testing. Only thing it didnt use same chain as the other 2, but a woodsman pro.


Yes, the 562 was just under 10 seconds, but using a brand new Woodsman Pro chain.

The 562 has had a LOT of fuel ran through it. My 362 is almost at 6 tanks and the 665 was on the start of its 3rd for that video.

665 and 562 both had 20" bars and 7 pin rims, the 362 was an 18" bar and 7 pin rim. So the bars were slightly different, but not enough to skew things one way or the other.

The 362 is a mean saw and I still love it, but this Solo is a Shocker!! I never imagined it to run this good. I will be doing some more comparisons this week if I get the chance (ported 441C-M vs Solo 655). The 441 should take the Solo, bit this will kind of give me a baseline on how far behind the 665.

I need Kevin or Tim's help here? I had my email set to my Gmail addy, and it is no longer working. So I went to change it to another email account?   Still not getting any replies to the threads. I normally like to reply and stay in conversation.

Thanks.
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21891
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #73 on: August 19, 2014, 12:36:51 pm »

I need Kevin or Tim's help here? I had my email set to my Gmail addy, and it is no longer working. So I went to change it to another email account?   Still not getting any replies to the threads. I normally like to reply and stay in conversation.

Thanks.

Are you clicking  notify under thread you are wanting to subscribe too?  Then clicking pop up OK to enable?   

REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21891
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #74 on: August 19, 2014, 12:44:16 pm »
Dex under your account setting you didnt have send email notification turned on.    Under profile etc = Notifications

Plus

Current Board Notifications    
You aren't receiving notifications on any boards right now.

To request notifications from a specific board, click the "notify" button in the index of that board.
REDNECK Saw Repair Getter Done

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: 65cc stock saw testing 10x10 cuts
« Reply #75 on: August 19, 2014, 01:08:57 pm »
Dex under your account setting you didnt have send email notification turned on.    Under profile etc = Notifications

Plus

Current Board Notifications    
You aren't receiving notifications on any boards right now.

To request notifications from a specific board, click the "notify" button in the index of that board.

Thanks Kevin!! I thought by me replying, I would get an email/update.  My mistake.  Not familiar with the software.

So, let me get this straight, so I am not a PITA and ask a million questions.  Even if I reply to a thread, I still have to hit/submit the Notify button? Thanks bud!!
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21891
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #76 on: August 19, 2014, 01:20:08 pm »
IMO Yep.

Unless you change a setting in your account to have it automatic to any thread you reply too.  You want me to check that for you if you cant find it?
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21891
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #77 on: August 19, 2014, 01:22:29 pm »
I went ahead and turned that on for you just in case.  Is under notifications too.

Just checked = Turn notification on when you post or reply to a topic. 
REDNECK Saw Repair Getter Done

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: 65cc stock saw testing 10x10 cuts
« Reply #78 on: August 19, 2014, 02:32:23 pm »
I went ahead and turned that on for you just in case.  Is under notifications too.


Just checked = Turn notification on when you post or reply to a topic. 

Thanks  8) It's working again. I was getting them, but when I changed my email addy, I must have changed that. My Gmail quit working because my "Cloud" is full (storage). So I have been deleting stuff slowly, but have put all my Forums, on another email addy, so I don't plug up the Cloud again.
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21891
  • Karma: 522
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 65cc stock saw testing 10x10 cuts
« Reply #79 on: August 19, 2014, 02:42:45 pm »
Cloud talk is way over my head. Literally  :-[  Sorry. 
REDNECK Saw Repair Getter Done

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
1730 Views
Last post May 14, 2012, 12:29:29 pm
by chainsman1
3 Replies
396 Views
Last post April 12, 2012, 06:17:11 pm
by EHP
7 Replies
820 Views
Last post February 19, 2015, 07:05:49 pm
by mdavlee .
1 Replies
437 Views
Last post September 29, 2012, 09:23:33 pm
by 660magnum
5 Replies
404 Views
Last post January 03, 2014, 06:28:33 am
by pete
3 Replies
240 Views
Last post February 17, 2014, 09:08:39 am
by KilliansRedLeo
9 Replies
2732 Views
Last post March 28, 2016, 10:51:30 pm
by 3000 FPS
2 Replies
266 Views
Last post September 23, 2014, 08:50:25 pm
by weimedog
2 Replies
124 Views
Last post July 12, 2017, 07:19:21 pm
by Cut4fun .
4 Replies
75 Views
Last post October 21, 2017, 05:43:00 pm
by Cut4fun .