Author Topic: Solo 603 Replacement Piston and Cylinder  (Read 3674 times)

0 Members and 72 Guests are viewing this topic.

Offline yldflight

  • 4 cube
  • **
  • Posts: 31
  • Karma: 1

  • Total Badges: 12
    Badges: (View All)
    Level 3 Second year Anniversary Mobile User One year Anniversary Karma Search
Solo 603 Replacement Piston and Cylinder
« on: October 09, 2012, 12:21:01 am »
Hi to everyone.

I'm just new to the site and have joined as i'm at a complete loss as to find a replacement piston and cylinder for a Solo 603 chainsaw.

If anyone can advise where i can find a replacement 56mm piston to suit the Solo 603 and/or a replacement cylinder, it would be greatly appreciated.

I've been tearing my hair out trying to find these parts. I am sure another piston from a different chainsaw manufacturer would fit, but no one seems to know any cross reference pistons that will do the job.

Hopefully the photos will be of help in finding a matching piston that will work in the Solo 603 cylinder, though i really need a new cylinder.

Kind regards
Fabian















Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Solo 603 Replacement Piston and Cylinder
« Reply #1 on: October 09, 2012, 06:47:11 am »
I wonder about a 56mm big bore 066 660 stihl piston being close or not.

There was a 603 piston and cylinder for sale awhile back. Guy I think in Germany had it and a 603 FS.

Offline yldflight

  • 4 cube
  • **
  • Posts: 31
  • Karma: 1

  • Total Badges: 12
    Badges: (View All)
    Level 3 Second year Anniversary Mobile User One year Anniversary Karma Search
Re: Solo 603 Replacement Piston and Cylinder
« Reply #2 on: October 09, 2012, 08:55:45 am »
I could be wrong but from what i understand, Solo and Stihl have their cylinders and pistons made by Mahle. It would seem logical that there should be a Stihl chainsaw with a 56mm piston and a 12mm wrist pin (gudgeon pin), and overall dimensions that are similar to the Solo 603 piston.

The best option would be if someone knows where i can find a replacement piston and cylinder combination.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Solo 603 Replacement Piston and Cylinder
« Reply #3 on: October 09, 2012, 09:49:17 am »
The Stihl 066/660 big bore piston is not a match and cannot be made to match. It is too short overall and the pin to deck is also too short.

From the Bailey's website . . .

Stihl 066/MS 660 with Big Bore Kit
Bore 56mm
Height 39mm
Head Type Flat
Piston Pin 12mm x 7mm x 33mm
Rings 56mm x 1.2mm Ductile Split Groove
Circlips 12mm
Compression/Pin to top of Piston 15.25mm
Compression/Pin Center to top of Piston 21.25mm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Solo 603 Replacement Piston and Cylinder
« Reply #4 on: October 09, 2012, 10:00:32 am »
In the 395 Husqvarna the pin is 13mm
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Solo 603 Replacement Piston and Cylinder
« Reply #5 on: October 09, 2012, 12:32:20 pm »
The Stihl 066/660 big bore piston is not a match and cannot be made to match. It is too short overall and the pin to deck is also too short.

From the Bailey's website . . .

Stihl 066/MS 660 with Big Bore Kit
Bore 56mm
Height 39mm
Head Type Flat
Piston Pin 12mm x 7mm x 33mm
Rings 56mm x 1.2mm Ductile Split Groove
Circlips 12mm
Compression/Pin to top of Piston 15.25mm
Compression/Pin Center to top of Piston 21.25mm


I wonder question how accurate baileys info is on BB piston. I wonder why the info on their big bore differs from a 54mm 066 piston so much in length etc.  ???

stock 54mm 066 info

    Stihl 066, MS 660
    Replaces Part Number 1122 030 2005
    Bore 53.96mm
    Height 43mm
    Head Type Flat
    Piston Pin 12mm x 8mm x 33mm
    Rings 54mm x 1.2mm (Caber F-Cast GH.F)
    Compression/Pin Top to top of Piston 17mm
    Compression/Pin Center to top of Piston 23mm

 

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Solo 603 Replacement Piston and Cylinder
« Reply #6 on: October 09, 2012, 12:44:32 pm »
Are the rings on these 1.5mm thick?  I have a set of afm 56mm 1.5mm rings left over from a 166 project long ago.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23708
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: Solo 603 Replacement Piston and Cylinder
« Reply #7 on: October 09, 2012, 12:50:10 pm »
Like Al Smith said, I have cleaned up much worse NLA piston and put new rings on and the saws still run afterwords. No it's not a perfect but it works.

 Make sure ring grooves are cleaned up with no burrs and moves freely in and out.  I run the ring around in groove till it rotates easily all the way around without catching.   Piston >OO<ring in groove like this till I get fit perfect.

Offline yldflight

  • 4 cube
  • **
  • Posts: 31
  • Karma: 1

  • Total Badges: 12
    Badges: (View All)
    Level 3 Second year Anniversary Mobile User One year Anniversary Karma Search
Re: Solo 603 Replacement Piston and Cylinder
« Reply #8 on: October 09, 2012, 02:47:45 pm »
If you look carefully at the up ended photo of the piston, you will see that the lowest section of the (exhaust side) piston skirt is half the thickness (by 0.5mm ) than the intake side of the skirt.

It slops about quite a bit in the bore and would most likely rattle the exhaust side of the piston skirt to pieces.

The biggest problem with the Solo 603 piston when considering a replacement from a different manufacturer is the 12mm wrist pin (piston pin) diameter.
Every 56mm piston seems to use either a 13mm or a 14mm wrist pin, and that seriously limits the potential piston options.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: Solo 603 Replacement Piston and Cylinder
« Reply #9 on: October 09, 2012, 07:51:53 pm »
Unless the exhaust port is extremely wide it looks like the pin placement would allow you put the piston in backwards . I don't know how well the intake would seal though .Might ,might not .

Wiseco no doubt could make you a piston as could that gent up on Canada .The problem there is the danged thing would cost 5 times what the saw is worth .

 

Related Topics

  Subject / Started by Replies Last post
0 Replies
473 Views
Last post May 24, 2012, 08:20:22 pm
by MP5N
3 Replies
1414 Views
Last post June 22, 2012, 10:47:14 pm
by farmboy
3 Replies
1018 Views
Last post November 06, 2013, 05:35:04 pm
by Captain Howdy
15 Replies
1455 Views
Last post July 11, 2014, 11:12:16 pm
by DexterDay
4 Replies
892 Views
Last post August 06, 2014, 04:15:37 pm
by adam32
Solo 680 piston

Started by Riddler1100 « 1 2 3 4 » Solo

36 Replies
3438 Views
Last post May 07, 2017, 08:12:32 am
by Cut4fun .
5 Replies
1028 Views
Last post October 30, 2015, 04:48:09 pm
by dboyd351
8 Replies
597 Views
Last post December 22, 2015, 12:16:44 pm
by waynec
5 Replies
890 Views
Last post January 10, 2016, 10:50:47 am
by Uncle Lee
3 Replies
608 Views
Last post January 02, 2021, 03:03:13 pm
by louie3888