Author Topic: Anyone with a 652?  (Read 403 times)

0 Members and 0 Guests are viewing this topic.

Offline Soyyosolo

  • pruner
  • *
  • Posts: 1
  • Karma: 0
Anyone with a 652?
« on: December 05, 2013, 01:28:41 pm »
I bought this saw brand new with an 18" blade. I discovered the couling clips were very brittle and I wrote to the company telling of my dissapointment. They obligedly sent me ample replacements. I use it intermittenly with great care. I would guess I put 15 tanks max through it since purchasing. Now I am bewildered again. For the first time ever the saw stopped running abruptly. There is no spark. Coil? Wire disconnected? It is barely broke in!! Luky I have a Stihl I can count on even if it only has a 14" bar. Has anyone experienced similar?

Share on Facebook Share on Twitter

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22129
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Anyone with a 652?
« Reply #1 on: December 05, 2013, 04:03:44 pm »
I know nothing about this solo. But will try to help some.  Says semi pro saw for medium duty.  I dont even see a solo 652 in the IPL's on the solo website.

Sure coil?  Have you checked at plug or with spark tester between the plug and coil?

REDNECK Saw Repair Getter Done

Offline 7sleeper

  • 4 cube
  • **
  • Posts: 39
  • Karma: 10
Re: Anyone with a 652?
« Reply #2 on: January 26, 2014, 04:53:43 am »
A few have them here but I have never heard of any problems (of the 646/652 line) from them. Is the coil loose so that the gap might ont be correct.

They belong in the farmer/semipro category. Not a bad saw, but as usual a small company has problems being visulized on the market.