« previous next »
Pages: 1 [2] 3   Go Down

Author Topic: UPS man delivered some red stuff today...  (Read 1303 times)

0 Members and 0 Guests are viewing this topic.

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: UPS man delivered some red stuff today...
« Reply #10 on: July 29, 2014, 08:43:04 am »
Both were built 2009, same month too...kinda strange.
Logged

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: UPS man delivered some red stuff today...
« Reply #11 on: July 30, 2014, 09:42:55 am »
Mine is also an 09 SN: 2502 09.
Shep
Logged

Offline farmboy

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 1170
  • Karma: 149
  • Location: Hayesville, NC
Re: UPS man delivered some red stuff today...
« Reply #12 on: July 30, 2014, 01:16:45 pm »
Sorry guys posted some bad info on the Solo 665 carb.  It's a Walbro HD-43A 16.67 venturi not a HD-48.  I had been looking @ a bunch of carbs trying to find something that would replace/work on a 5100 Dolmar got my info mixed up.  Did learn the Zama C3M EL8A from a 1998 Husky 365 is 17mm that's where I got the 17 from.  Was looking @ these carbs to see if I could get one of them to work on the 5100 without too much trouble.  As we all know it can be made to fit/work LOL.
Shep
Logged

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: UPS man delivered some red stuff today...
« Reply #13 on: August 05, 2014, 10:41:19 pm »
Subscribed  ;D

I want to see, hear, and know anything about these saws.  8)
Logged
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: UPS man delivered some red stuff today...
« Reply #14 on: August 11, 2014, 12:38:28 pm »
On FHC one of the members who bought one of the 665s ran his (not yet broken in) 665 against a ported HVA 562XP. Only one run was a fair comparison due to knots, the box stock 665 appeared to outrun the ported 562XP by .4 of a second.

We will see when Kevin, Dexter and the rest of the boys have a go later in the month.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: UPS man delivered some red stuff today...
« Reply #15 on: August 11, 2014, 02:45:57 pm »
Quote from: KilliansRedLeo on August 11, 2014, 12:38:28 pm
On FHC one of the members who bought one of the 665s ran his (not yet broken in) 665 against a Masterminded HVA 562XP. Only one run was a fair comparison due to knots, the box stock 665 appeared to outrun the ported 562XP by .4 of a second.

We will see when Kevin, Dexter and the rest of the boys have a go later in the month.

Kevin posted the video here too...under the 562xp thread and also the timed cut thread.

I knew the Solo would out run a stock 562, pretty surprised on the ported one tho...
Logged

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: UPS man delivered some red stuff today...
« Reply #16 on: August 11, 2014, 02:51:53 pm »
To be honest, I was surprised too, sometimes 'ported' may not always equate to 'faster or better'. Perhaps a good omen for the last of the 665s.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21769
  • Karma: 519
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: UPS man delivered some red stuff today...
« Reply #17 on: August 11, 2014, 03:16:08 pm »
Quote from: KilliansRedLeo on August 11, 2014, 12:38:28 pm

We will see when Kevin, Dexter and the rest of the boys have a go later in the month.

Next 2 weekends I have family commitments. So hopefully 24th or after.  If not no biggie on my end.
Logged
REDNECK Saw Repair Getter Done

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: UPS man delivered some red stuff today...
« Reply #18 on: August 13, 2014, 09:22:41 am »
I have had so many inquiries about the availability of any Solos that were not already sold; that last night I asked Randy to send one of the saws I sent to him to be ported back. He still has the one he purchased, so I believe he will still be porting at least one for all to see.
Logged
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline DexterDay

  • 4 cube
  • **
  • Posts: 49
  • Karma: 8
Re: UPS man delivered some red stuff today...
« Reply #19 on: August 15, 2014, 09:38:24 pm »
Quote from: Cut4fun_ on August 11, 2014, 03:16:08 pm
Quote from: KilliansRedLeo on August 11, 2014, 12:38:28 pm

We will see when Kevin, Dexter and the rest of the boys have a go later in the month.

Next 2 weekends I have family commitments. So hopefully 24th or after.  If not no biggie on my end.

I was thinking Labor day weekend or after. I have worked 20 days straight now and probably won't get a day off till next weekend.  But would like to do it after that..

I have been super impressed with the stock 665 as well. I will be making another video of a stock 562xp,  my stock 665, and also my ported MS 362C-M.  All with new off the loop RS chain.
Logged
Mastermind'd Stihl MS 261C-M
Mastermind'd Stihl MS 460
MasterMind'd Stihl MS 461
MasterMind'd Stihl Jonsered 2171
Pages: 1 [2] 3   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
9 Replies
1511 Views 		Last post January 21, 2012, 08:12:30 pm
by tommyhnavix
7 Replies
269 Views 		Last post December 23, 2013, 06:18:37 pm
by SawTroll
2 Replies
322 Views 		Last post February 21, 2014, 10:24:29 am
by SDB777
6 Replies
522 Views 		Last post May 30, 2014, 08:24:23 pm
by Billyram
6 Replies
551 Views 		Last post December 18, 2017, 05:45:22 pm
by Philbert
12 Replies
327 Views 		Last post September 23, 2015, 06:28:29 am
by jmester
4 Replies
608 Views 		Last post February 21, 2016, 03:46:58 pm
by Flip D
64 Replies
442 Views 		Last post June 17, 2016, 04:50:09 pm
by 1manband
0 Replies
97 Views 		Last post December 17, 2017, 09:32:13 am
by Cut4fun .
1 Replies
82 Views 		Last post May 24, 2018, 02:27:47 pm
by Cut4fun .