Author Topic: How to video thread  (Read 4232 times)

0 Members and 0 Guests are viewing this topic.

Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45
Re: How to video thread
« Reply #40 on: November 22, 2012, 09:41:20 am »
Thanks for the demo

Any time.  A little paying it forward ya know.

Like most I learn best from watching or pictures. 

And the dreaded Stihl clammy. 

http://www.youtube.com/watch?v=fUEiXMzpXTs

Offline pete

  • Piped Saw
  • *****
  • Posts: 375
  • Karma: 22
Re: How to video thread
« Reply #41 on: November 23, 2012, 01:21:15 am »
Thanks enjoyed this one as well, I'm a visual learner If I read it without pictures I have a hard time vids make it easy cheers

Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17727
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: How to video thread
« Reply #43 on: December 19, 2012, 01:26:42 pm »
There was a guy that used to bring a 350 down with him for our little mini gtg's years ago. I think it had a ported NE346 top with the 357 199 carb.
 
That guys video from your state ( I think) making the new spacer for one to run the bigger topend was over the top.  :o 8) 8)
Has he ever finished up on that one?

Thanks for sharing the video, now guys can see some options in front of them.
REDNECK Saw Repair Getter Done

Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45
Re: How to video thread
« Reply #44 on: December 19, 2012, 01:36:27 pm »

 
That guys video from your state ( I think) making the new spacer for one to run the bigger topend was over the top.  :o 8) 8)
Has he ever finished up on that one?


Yes its done and runs just like a ported 359.  He was just up Monday to get more parts for another one......and drop off a free lathe for me :)

He has a base cut to accept the 272 top end as well but forgot that cylinder in my shop.

I may add, this is the kit Somonians sells on ebay.  It comes with all parts needed to do the conversions.  Could have ordered it all my self but it was convenient lol

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17727
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: How to video thread
« Reply #45 on: December 19, 2012, 02:33:06 pm »

 
That guys video from your state ( I think) making the new spacer for one to run the bigger topend was over the top.  :o 8) 8)
Has he ever finished up on that one?


Yes its done and runs just like a ported 359.  He was just up Monday to get more parts for another one......and drop off a free lathe for me :)

He has a base cut to accept the 272 top end as well but forgot that cylinder in my shop.

I may add, this is the kit Somonians sells on ebay.  It comes with all parts needed to do the conversions.  Could have ordered it all my self but it was convenient lol

I have heard of 272 stuffed in husky 50 on the race circuit.

Which one?

http://www.ebay.com/itm/HUSQVARNA-346-xp-350-353-JONSERED-2150-2152-cylinder-KIT-chainsaw-after-market-/300820194172?pt=LH_DefaultDomain_0&hash=item460a47e37c

http://www.ebay.com/itm/HUSQVARNA-350-conversion-to-346xp-cylinder-KIT-AFTER-MARKET-parts-/290811129350?pt=LH_DefaultDomain_0&hash=item43b5b1ae06

http://www.ebay.com/itm/Husqvarna-350-cylinder-kit-44mm-346xp-2150-Jonsered-/300818224156?pt=LH_DefaultDomain_0&hash=item460a29d41c

http://www.ebay.com/itm/HUSQVARNA-346-xp-OEM-parts-350-353-JONSERED-2152-cylinder-KIT-/300606800849?pt=LH_DefaultDomain_0&hash=item45fd8fc3d1

REDNECK Saw Repair Getter Done

Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45
Re: How to video thread
« Reply #46 on: December 19, 2012, 02:42:26 pm »
This one.  Cylinder quality was decent.  Transfers as they opened int the cylinder could use some clean up but would work just fine.  Clips SUCKED

http://www.ebay.com/itm/290817539780?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 17727
  • Karma: 333
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: How to video thread
« Reply #47 on: December 19, 2012, 02:54:40 pm »
This one.  Cylinder quality was decent.  Transfers as they opened int the cylinder could use some clean up but would work just fine.  Clips SUCKED

http://www.ebay.com/itm/290817539780?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

Mitch on the 1st kit I posted what is he talking about on large transfers (why is that kit listed like that I wonder)? I've really never noticed a difference in the ones I have had off by looks.  You?

http://www.ebay.com/itm/HUSQVARNA-346-xp-350-353-JONSERED-2150-2152-cylinder-KIT-chainsaw-after-market-/300820194172?pt=LH_DefaultDomain_0&hash=item460a47e37c
REDNECK Saw Repair Getter Done

Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45
Re: How to video thread
« Reply #48 on: December 19, 2012, 03:26:52 pm »


Mitch on the 1st kit I posted what is he talking about on large transfers (why is that kit listed like that I wonder)? I've really never noticed a difference in the ones I have had off by looks.  You?


No idea.  Always assumed he was pointing out the 346 style closed trans.


Offline mweba

  • Piped Saw
  • *****
  • Posts: 374
  • Karma: 45
Re: How to video thread
« Reply #49 on: January 01, 2013, 12:50:23 pm »
Checking ignition timing for coil swap.

http://www.youtube.com/watch?v=SDrmLhi4isA

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
381 Views
Last post February 23, 2013, 11:55:26 am
by Cut4fun .
8 Replies
194 Views
Last post March 09, 2013, 10:10:30 pm
by stihlbro
1 Replies
271 Views
Last post March 29, 2013, 12:16:55 pm
by Al Smith
15 Replies
687 Views
Last post December 07, 2013, 03:39:46 pm
by Arrow13
4 Replies
354 Views
Last post November 28, 2013, 08:16:36 pm
by Jd2007
12 Replies
123 Views
Last post January 31, 2014, 11:43:30 am
by KilliansRedLeo
9 Replies
445 Views
Last post April 02, 2014, 10:48:15 pm
by Philbert
7 Replies
335 Views
Last post February 17, 2015, 09:13:42 pm
by mcbob
3 Replies
174 Views
Last post April 24, 2015, 02:51:01 pm
by Eccentric
12 Replies
231 Views
Last post February 18, 2016, 07:45:29 pm
by dannyupsolate