Author Topic: 024 AVS tear down  (Read 1149 times)

0 Members and 0 Guests are viewing this topic.

Offline woodyweeder

  • 3 cube
  • *
  • Posts: 13
  • Karma: 0
Re: 024 AVS tear down
« Reply #10 on: July 29, 2012, 10:01:50 pm »
Thanks for this great info!
I don't have the seal removal tool I have seen on youtube - can I go ahead and try to flick / prise  them out (using something like plastic that wont do any damage to the case) or is the tool required?
The crank also is not so stiff to turn over now with a little lube - looks like part of it slightly brushes one of the bearings as it rotates.
Has anyone bought gear from Hutzl on ebay? I'm considering a piston from them (and a kit with the seals and new gasket) but I'm wondering how they can make the stuff so cheaply! I guess there is not too much to loose though seeing as it is so cheap.


Related Topics

  Subject / Started by Replies Last post
6 Replies
Last post December 06, 2016, 08:09:47 am
by wild262