Author Topic: 024 AVS tear down  (Read 1958 times)

0 Members and 3 Guests are viewing this topic.

Offline woodyweeder

  • 3 cube
  • *
  • Posts: 13
  • Karma: 0

  • Total Badges: 12
    Badges: (View All)
    Second year Anniversary Level 3 One year Anniversary 10 Posts Topic Starter First Post
024 AVS tear down
« on: July 28, 2012, 11:51:20 pm »
Hi all, been reading a while here but this is my first post. I have recently bought an 024 that has had a bit of a hard life. I got it running with a carb kit but it kept on loosing it's tuning, so since the piston is worn I decided to pull it to bits and replace whatever it needs. My first question is should the crank be stiff to turn over by hand? I thought the crank seals might need renewing but they look visually ok. There is no play in the bearings. My next question is should I just replace these anyway now I'm this far in, and is aftermarket ok?

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 024 AVS tear down
« Reply #1 on: July 29, 2012, 12:17:19 am »
Welcome to the site.

Being as you have it torn down this far, I would go ahead and put seals in it.

Some after market seals are OK.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 024 AVS tear down
« Reply #2 on: July 29, 2012, 08:59:49 am »
I'm sure after market seals would work except for the fact most Sthl seals are OEM meaning special design and they own world wide rights to them .

For example the clutch side seal part number 9640-003-1600 is 15 x 29.6 x 4 .Now that 29.6 MM OD is the snag because it's an odd ball size .

Conversely it appears the flywheel side .
,part number 9640-003-1190 might be standard being 12 x 20 x 5.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 024 AVS tear down
« Reply #3 on: July 29, 2012, 09:12:10 am »
I took the liberty of surfing flea bay and much to my surprise they are selling seals for these saws very reasonabley priced .Unusual to say the least .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23706
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: 024 AVS tear down
« Reply #4 on: July 29, 2012, 10:22:27 am »
I bought a set of these for the 036. I didnt need them so they are in the stihl stash box.

Replacement oil seal for Stihl models 020, 020T, 024, 026, 034, 036, 036 QS, MS200, MS200T, MS240, MS260, MS340, MS360, MS360C. Measures 12x20x5mm. Replaces OEM 9640 003 1190 and 9640 003 1191.

http://northwoodsaw.com/store/index.php?l=product_detail&p=890


Replacement oil seal for Stihl 024, 026, 028, 034, 036, 036 QS, 046, 084, MS240, MS260, MS340, MS341, MS360, MS360 C, MS361, MS361 C, MS460.l . Measures 15x29.6x4mm. Replaces OEM 9640 003 1600.

http://northwoodsaw.com/store/index.php?l=product_detail&p=894



Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 024 AVS tear down
« Reply #5 on: July 29, 2012, 11:08:53 am »
----Replacement oil seal for Stihl models 020, 020T, 024, 026, 034, 036, 036 QS, MS200, MS200T, MS240, MS260, MS340, MS360, MS360C. Measures 12x20x5mm. Replaces OEM 9640 003 1190 and 9640 003 1191.----

That is the correct number because I've got two OEM seals right in front of me as I type this for one of my 200Ts. Those were like 8 bucks a pop from a dealer .


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 024 AVS tear down
« Reply #6 on: July 29, 2012, 11:55:01 am »
Both of you are correct, the 9640 003 1190  12 X 20 X 5 is used on both sides of the 200T

But the seals are different from one side to the other on the 024 and the other seal is the 9640 003 1600 for the clutch side of the 024
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: 024 AVS tear down
« Reply #7 on: July 29, 2012, 11:58:03 am »
I posted both seals the OP needs for his 024 in links above.

Welcome to the site woodyweeder

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 024 AVS tear down
« Reply #8 on: July 29, 2012, 12:58:29 pm »
For that matter so did I .However until this thread I had no idea the small seals used on the 200T also fit other models .Nor did I know the special seals used on the flywheel side were being produced in after market .Nice to know for future reference .Glad this topic came up .

Now if somebody would just throw together a quality after market piston and cylinder for the 020/200Ts it would be a red letter day . :)

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23706
  • Karma: 664
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair

  • Total Badges: 53
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Level 8 Apple User Eighth year Anniversary 20000 Posts
Re: 024 AVS tear down
« Reply #9 on: July 29, 2012, 01:21:58 pm »
Al I think afm 200 p+c is out there now too.

 

Related Topics

  Subject / Started by Replies Last post
6 Replies
782 Views
Last post December 06, 2016, 08:09:47 am
by wild262