Chainsaw Repair

So finally got all my bits; 026 P&C, decomp, etc.  Had a hell of a time getting the rubber bellows onto the cylinder intake. Saw would not start. New filter and line carb set 1 1/4 and 1. Not sure about my comp tester but only seemed to get a 80 psi. Chinese de-comp leaking as well as the oEM fuel cap.  replaced those at my local dealer, didn't want to wait another 4 weeks.
 trickled some fuel into the carb and it started Actually just sealed the decomp. not really needed on a 47cc saw.

The AF that came with this saw doesn't the tab the the AF cover latches onto so it remains loose.  Have to get a different air filter.

Huztl top cover not a great fit without tweeking and sadly no place for the nice Stihl Super 024 plate.

I have a Huztl P&C for a standard 024 if anyone needs one.

I have an old solid nose bar from my o31av but need a .325 chain, although I guess I could run the 3/8th on it with a new sprocket