Author Topic: Ms290 chain issue  (Read 124 times)

0 Members and 0 Guests are viewing this topic.

Offline Driscoll

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Ms290 chain issue
« on: September 30, 2015, 04:58:10 pm »
I have a sthil ms290 from eBay and the chain Is oragon l81 won't fit the sprocket on the chain saw the sprocket is oragon 3/8-7 what would be the correct oragon sprocket ?

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22126
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Ms290 chain issue
« Reply #1 on: September 30, 2015, 05:31:54 pm »
All 290 I have had in was .325.   

Oregon L81 = 325 063 81dl

Sounds like you have .325 chain  with 3/8 rim?

Whats is your bar  for and gage?

Got to match everything up.
REDNECK Saw Repair Getter Done

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22126
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Ms290 chain issue
« Reply #2 on: September 30, 2015, 05:33:47 pm »
L81     MICRO CHISEL 22BPX   81   .325"   .063"   3/16"
REDNECK Saw Repair Getter Done

Offline Driscoll

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Ms290 chain issue
« Reply #3 on: September 30, 2015, 05:55:09 pm »
Oregon bar pro-am 20" new bar came with l81 out of the box says l81 on bar 203sfgd025 9n combo 105671

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22126
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Ms290 chain issue
« Reply #4 on: September 30, 2015, 06:00:45 pm »
The you have 325 b+c on a 3/8 rim?  Thats no go. Put you a 325 7 on there.
REDNECK Saw Repair Getter Done

Offline Driscoll

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Ms290 chain issue
« Reply #5 on: September 30, 2015, 06:26:03 pm »
Will that fit the Clutch 34162

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22126
  • Karma: 551
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Ms290 chain issue
« Reply #6 on: September 30, 2015, 06:27:28 pm »
Your loosing me now.  Goes on the drum.
REDNECK Saw Repair Getter Done

Offline Driscoll

  • pruner
  • *
  • Posts: 4
  • Karma: 0
Re: Ms290 chain issue
« Reply #7 on: September 30, 2015, 06:44:30 pm »
Yes the drum

Online jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2065
  • Karma: 158
  • Location: MD
Re: Ms290 chain issue
« Reply #8 on: September 30, 2015, 09:14:25 pm »
If You have the 34162 drum then all you would need is the rim. Oregon part number 11892. The rim that comes with the 34162 is 3/8 7 tooth. 
FEAR NO TREE. FEAR GOD.

 

Related Topics

  Subject / Started by Replies Last post
8 Replies
617 Views
Last post August 30, 2012, 12:53:08 pm
by Remington
22 Replies
625 Views
Last post January 24, 2016, 05:16:42 pm
by Reddog
5 Replies
723 Views
Last post January 25, 2014, 03:07:17 pm
by Infinitive
8 Replies
315 Views
Last post April 13, 2014, 10:13:50 pm
by 3000 FPS
30 Replies
415 Views
Last post November 02, 2014, 11:32:40 am
by TommyC
6 Replies
223 Views
Last post May 19, 2015, 06:53:03 am
by Spike60
4 Replies
251 Views
Last post October 19, 2015, 07:20:58 pm
by jrdplowing
0 Replies
253 Views
Last post October 17, 2015, 03:31:43 pm
by jrdplowing
3 Replies
232 Views
Last post February 21, 2016, 01:21:50 pm
by Old Iron Logging
10 Replies
311 Views
Last post October 10, 2016, 08:25:35 am
by Old Iron Logging