Author Topic: 038 Mag Tilly Carb with compensator  (Read 171 times)

0 Members and 0 Guests are viewing this topic.

Offline trappermike

  • 5 cube
  • ***
  • Posts: 129
  • Karma: 17
  • 40 years mechanical and 2-Stroke racing experience
  • Location: British Columbia, Canada
Re: 038 Mag Tilly Carb with compensator
« on: January 01, 2019, 02:23:13 pm »
Sometimes on the 038 Bing the metering lever height was too high/too low and you cannot bend or adjust the plastic lever. But the seat the inlet needle seats on is movable,very carefully with a flat punch you can tap the seat one way or other and get correct metering lever height.
They were a good carb and ran well.
Experience builds real horsepower...
When the hammer drops the BS stops:Loggers sports competition!
Like Like x 1 View List