« previous next »
Pages: [1]   Go Down

Author Topic: 041 FarmBoss no spark  (Read 747 times)

0 Members and 0 Guests are viewing this topic.

Offline DCC

  • 4 cube
  • **
  • Posts: 30
  • Karma: 2
  • Location: Kaleva MI
041 FarmBoss no spark
« on: November 04, 2013, 09:49:49 am »
Have a 041 with SEM ignition (no points) and it has no spark. It looks like there are 4 magnets on flywheel but only 2 are magnetic. Are all 4 supposed be magnetic? 
Logged

Share on Facebook Share on Twitter

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 171
  • Location: MD
Re: 041 FarmBoss no spark
« Reply #1 on: November 06, 2013, 08:29:24 pm »
Should only be 2 magnets. There are 2 flat spots on the flywheel. And yes they should be magnetic. Have you checked you ignition lead from the coil to the plug for bare spots and cracks that would cause it to ground. Also check your kill switch wire. Have seen a few get rubbed threw from how they are routed. Then check your on/off switch. And last but not least your coil maybe no good. Also check your armature gap.
Logged
FEAR NO TREE. FEAR GOD.

Offline DCC

  • 4 cube
  • **
  • Posts: 30
  • Karma: 2
  • Location: Kaleva MI
Re: 041 FarmBoss no spark
« Reply #2 on: November 06, 2013, 10:23:25 pm »
Pretty sure it needs a coil but cant seem to find just coil only whole ignition. Any ideas? I have checked chainsawr, sawagain, and ebay.
Logged

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 171
  • Location: MD
Re: 041 FarmBoss no spark
« Reply #3 on: November 07, 2013, 08:00:30 pm »
The coil you are looking for should be part number 1110 404 3210. That coil is only found on a 041 and a 045. Put a post in the wanted section for it someone on here my have a used one.
Logged
FEAR NO TREE. FEAR GOD.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2106
  • Karma: 171
  • Location: MD
Re: 041 FarmBoss no spark
« Reply #4 on: November 07, 2013, 08:04:28 pm »
here is one i found on ebay. they sure are expensive. http://www.ebay.com/itm/NEW-STIHL-IGNITION-COIL-Part-1110-404-3210-/231077815695
Logged
FEAR NO TREE. FEAR GOD.

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 368
  • Karma: 37
Re: 041 FarmBoss no spark
« Reply #5 on: November 08, 2013, 06:04:56 am »
Lee at the red barn may have some parts that will work for you;
http://www.lilredbarn.net/Stihl-041AVFB-Ignition-Coil-and-Chip-s/51154.htm
Logged

Offline DCC

  • 4 cube
  • **
  • Posts: 30
  • Karma: 2
  • Location: Kaleva MI
Re: 041 FarmBoss no spark
« Reply #6 on: November 08, 2013, 07:32:29 am »
Thanks for the help guys!
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
4 Replies
721 Views 		Last post December 23, 2011, 08:03:18 pm
by Dh1984
0 Replies
230 Views 		Last post January 02, 2012, 06:48:32 pm
by Dh1984
3 Replies
693 Views 		Last post February 11, 2012, 10:45:11 am
by Al Smith
026 vs Farmboss

Started by Vance in AK « 1 2 » Stihl

10 Replies
3443 Views 		Last post August 22, 2012, 11:06:21 am
by Al Smith
0 Replies
200 Views 		Last post November 17, 2012, 11:26:10 pm
by Dh1984
2 Replies
528 Views 		Last post May 08, 2013, 09:00:32 am
by Magnus
9 Replies
658 Views 		Last post March 15, 2014, 12:39:03 pm
by sharkey
288XP no spark

Started by JC360 « 1 2 ... 8 9 » Husqvarna

82 Replies
2779 Views 		Last post April 10, 2014, 09:24:23 am
by KilliansRedLeo
9 Replies
1083 Views 		Last post June 18, 2017, 08:25:10 pm
by Al Smith
4 Replies
530 Views 		Last post January 31, 2018, 03:35:12 pm
by Cut4fun .