Author Topic: 041 Hard Starter Pull  (Read 1400 times)

0 Members and 62 Guests are viewing this topic.

Offline BlackhorseVet

  • 3 cube
  • *
  • Posts: 5
  • Karma: 0

  • Total Badges: 8
    Badges: (View All)
    One year Anniversary Level 2 Combination Topic Starter First Post Level 1
041 Hard Starter Pull
« on: October 19, 2013, 07:17:48 pm »
I was recently given an older 041av that had been sitting in a friends garage unused for 15-20 years. Before ever pulling on the starter I removed the plug to check for spark, cleaned the carburetor and fuel system and removed the bar and chain and cleaned everything I could get to. I put it all back together, fueled it up and attempted to start it. There is so much compression
I can barely pull the starter handle. Any help would be greatly appreciated. Thanks.

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: 041 Hard Starter Pull
« Reply #1 on: October 19, 2013, 07:22:06 pm »
Make sure it has the larger size starter cord. Lawn mower cord will pull though itself on the starter pulley and be hard to pull and wear itself out in no time.

Also you can use a snow mobile or snow blower or rescue saw starter handle on the rope so you can wrap your whole hand around the handle.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada

  • Total Badges: 32
    Badges: (View All)
    Seventh year Anniversary Level 6 Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary Linux User
Re: 041 Hard Starter Pull
« Reply #2 on: October 19, 2013, 07:34:38 pm »
you sure it isn't flooded? you said you 'cleaned the fuel system'. does that mean you also rebuilt the carb or just threw the old rubber bits back in?
when I grow up, i wanna be an adult.

Offline BlackhorseVet

  • 3 cube
  • *
  • Posts: 5
  • Karma: 0

  • Total Badges: 8
    Badges: (View All)
    One year Anniversary Level 2 Combination Topic Starter First Post Level 1
Re: 041 Hard Starter Pull
« Reply #3 on: October 19, 2013, 07:45:10 pm »
It has the correct starter rope and it's not flooded. I put a new carb kit in it but I wasn't even able to pull it enough to get the fuel to the carb. I should have mentioned that when I pulled the plug to check for spark the pull was normal with the plug out.
With the plug re-installed there is so much compression the pull is super hard. Thanks.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 041 Hard Starter Pull
« Reply #4 on: October 19, 2013, 07:52:56 pm »
Couple things .The starter rope as already stated could be binding on the rope drum .The drum itself could be binding on the shaft .

I've had them already where the bushing was defective in the rope drum causing them to bind up .One case it just happened to be a 2100 Husqvarna which is hard enough to pull over if everything is working properly .I couldn't hardly budge it with two hands on the pull rope .I made a brass bushing to replace the defective plastic one and that was that. 

Offline BlackhorseVet

  • 3 cube
  • *
  • Posts: 5
  • Karma: 0

  • Total Badges: 8
    Badges: (View All)
    One year Anniversary Level 2 Combination Topic Starter First Post Level 1
Re: 041 Hard Starter Pull
« Reply #5 on: October 19, 2013, 08:31:58 pm »
I just pulled the starter assembly and it appears to be working smoothly with no real wear apparent but the rope does look old
and could be slipping internally as you suggested so I will take your advice and replace it. I can actually turn the flywheel by hand a lot easier than I can with the pull start. Thanks for your help!!!

Offline Fish

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 39

  • Total Badges: 19
    Badges: (View All)
    Second year Anniversary One year Anniversary Search Level 4 100 Posts 50 Posts
Re: 041 Hard Starter Pull
« Reply #6 on: October 21, 2013, 10:23:28 am »
Also pull the plug again and look for any traces of oil, oiler troubles could be "upping" the compression feel. 

     Also, excessive carbon deposits in the combustion chamber can be a problem as well, it doesn't take much to kick up the ratio.

Offline jockeydeuce

  • 4 cube
  • **
  • Posts: 41
  • Karma: 7

  • Total Badges: 11
    Badges: (View All)
    Level 3 One year Anniversary Mobile User 10 Posts Karma Level 2
Re: 041 Hard Starter Pull
« Reply #7 on: October 21, 2013, 12:48:58 pm »
So how does it pull through with no spark plug in?????

I've never thought of an 041 as a compression monster.....Like others, I suspect you have something binding.

Offline BlackhorseVet

  • 3 cube
  • *
  • Posts: 5
  • Karma: 0

  • Total Badges: 8
    Badges: (View All)
    One year Anniversary Level 2 Combination Topic Starter First Post Level 1
Re: 041 Hard Starter Pull
« Reply #8 on: October 21, 2013, 03:53:12 pm »
I took some time this morning and double-checked the rope starter and compared it to the starter on an old 029 FarmBoss that I've had for years and has about 60 cords under it's belt. The difference in side play between the two is night and day. I'm sure the bushing is shot just as Al Smith said. I was able to find a n.o.s. pulley assembly on ebay for $22 including shipping which I thought was a fair price. A couple of more questions while I'm here. Should the bushing on the new pulley be lubricated or installed dry? Assuming I get this saw running properly can anyone tell me a fair market value of an 042av super electronic with a 24" bar and chain? Thanks again for the input.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2779
  • Karma: 181

  • Total Badges: 34
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 6 Seventh year Anniversary Sixth year Anniversary
Re: 041 Hard Starter Pull
« Reply #9 on: October 22, 2013, 07:56:32 am »
The problem if you oil them up is it will draw in fine sawdust making the situation worse in time .

 

Related Topics

  Subject / Started by Replies Last post
80 Replies
4812 Views
Last post February 13, 2014, 02:37:33 pm
by mastercraftka
10 Replies
1223 Views
Last post February 04, 2014, 03:24:19 pm
by president
15 Replies
4576 Views
Last post February 28, 2017, 10:26:34 am
by Cmtrey
6 Replies
500 Views
Last post April 08, 2015, 11:39:15 am
by Randy
26 Replies
2172 Views
Last post August 16, 2016, 12:00:26 am
by mikehonda
16 Replies
4257 Views
Last post September 06, 2020, 09:55:48 pm
by Spike60
9 Replies
1347 Views
Last post June 18, 2017, 08:25:10 pm
by Al Smith
13 Replies
1359 Views
Last post October 13, 2017, 05:45:23 am
by mountainlake
3 Replies
2388 Views
Last post August 28, 2017, 05:16:25 pm
by 660magnum
1 Replies
390 Views
Last post October 23, 2022, 06:55:03 am
by Cut4fun