Author Topic: 046 ignition coil  (Read 362 times)

0 Members and 0 Guests are viewing this topic.

Offline Acel83

  • 3 cube
  • *
  • Posts: 20
  • Karma: 1
046 ignition coil
« on: July 03, 2016, 10:01:53 am »
Are a 1312 and a 1314 coil for a 046/ms460 the same. Did the 1314 replace it or something like that? Looks similar based on pics.

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 046 ignition coil
« Reply #1 on: July 03, 2016, 11:55:02 am »
Just my WAG. 1314 is the last part number shown in the 046 460 IPL's and one used on the farmtec coils.    Betting just updated part numbers from 12 to 14
REDNECK Saw Repair Getter Done

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2048
  • Karma: 157
  • Location: MD
Re: 046 ignition coil
« Reply #2 on: July 04, 2016, 11:49:23 am »
You can run either one of those ignition modules. Need the new pass code for  my program from my dealer. Then maybe I can do a little more research and tell you the difference. i think the only difference between them was the length of the ignition lead when you bought them. The 1312 for the 046-460 and the 1314 for the 660. Then stihl just went with the 1314 to keep it simple.
FEAR NO TREE. FEAR GOD.
Like Like x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 046 ignition coil
« Reply #3 on: July 15, 2016, 02:23:26 pm »
I was ask this question on the farmtec coil for 460 that has the longer 660 leads.

(Do you know if on the farmer tec ignition coils, I can trim the lead wire shorter. The plug is several inches longer than oem lead wire. Didn't want to try and unscrew it and wreck the coil if it didn't have the option.)

Dont these just unscrew? Not sure being farmtec

@DefinitiveDave 

Farmertec Stihl Chainsaw Ignition Coil MS660 MS460 046 066, MS650

Overlook the price listed. That is just Dave's way of not having to relist when stock is out. http://www.ebay.com/itm/Stihl-Chainsaw-Ignition-Coil-MS660-MS460-046-066-MS650-/221674862971?hash=item339cd9f97b:g:8VcAAOSwGvhUHeAE
REDNECK Saw Repair Getter Done

Offline Acel83

  • 3 cube
  • *
  • Posts: 20
  • Karma: 1
Re: 046 ignition coil
« Reply #4 on: July 15, 2016, 03:10:59 pm »
Boot end does not,  it just spins the coil connector. The coil end unscrews from the coil itself since it has a threaded screw sticking out. I cut off what I needed and rethread onto the screw until secure. I hope that was right lol. I have spark and it starts up then shuts right off. I believe I need some readjusting of either carb or magneto gap which I just slipped a business card to check and make sure it wasn't going to rub.
Agree Agree x 1 View List

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22011
  • Karma: 541
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: 046 ignition coil
« Reply #5 on: July 15, 2016, 06:30:09 pm »
Slip card in while coil is loose. Let draw up on flywheel magnets. The tighten down. Pull car out and should be some pull against you puling card out.

The boot should pull off.

I was asking for you IF the coil wire lead unscrews out of coil itself.

There is this inside the boot that is pinned to wire.



REDNECK Saw Repair Getter Done

Offline Acel83

  • 3 cube
  • *
  • Posts: 20
  • Karma: 1
Re: 046 ignition coil
« Reply #6 on: July 15, 2016, 10:49:52 pm »
When I tried to unscrew the boot off of the lead wire that metal spring or whatever it's called ended up rotating sideways and I had to straighten it out with a small screwdriver. I hope that didn't affect anything internally and be the cause of the quick shutoff of the saw.

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
348 Views
Last post January 31, 2013, 09:18:08 am
by Al Smith
3 Replies
416 Views
Last post December 09, 2013, 10:59:02 pm
by mortalitool
2 Replies
335 Views
Last post January 09, 2014, 03:10:57 pm
by tommysp61
3 Replies
182 Views
Last post January 13, 2014, 08:15:53 pm
by KilliansRedLeo
2 Replies
306 Views
Last post January 22, 2014, 07:13:30 pm
by 660magnum
12 Replies
2034 Views
Last post March 27, 2016, 01:48:26 pm
by gregh
2 Replies
165 Views
Last post May 23, 2015, 04:51:32 pm
by 660magnum
6 Replies
634 Views
Last post June 23, 2015, 01:36:09 pm
by Fish
9 Replies
1565 Views
Last post January 06, 2018, 02:15:50 pm
by dpjones
5 Replies
227 Views
Last post April 19, 2018, 11:53:09 am
by Cut4fun .