Author Topic: 08 S electromic quickstop  (Read 232 times)

0 Members and 21 Guests are viewing this topic.

Offline stuie

  • pruner
  • *
  • Posts: 1
  • Karma: 0

  • Total Badges: 3
    Badges: (View All)
    Level 1 Search Windows User
08 S electromic quickstop
« on: March 28, 2018, 05:46:15 am »
hello from Dublin Ireland folks!
now go easy on me im new  ::)

i have got myself a 08 S STIHL  :)

I am scratching my head with this saw! the "mechanic" that had it for 3 weeks to service it.... well il keep
the profanity out of this post  >:(

so as it stands when i start the saw it seems the bar drops and the chain tightens then the engine stalls  :'(

i cant see a serial number anywhere on the saw. just dont want to run it to much as im afraid of doing damage to engine

any help/advise would be greatly appreciated 

Share on Facebook Share on Twitter


Offline trappermike

  • 5 cube
  • ***
  • Posts: 129
  • Karma: 17
  • 40 years mechanical and 2-Stroke racing experience
  • Location: British Columbia, Canada

  • Total Badges: 17
    Badges: (View All)
    100 Posts Level 4 50 Posts Third year Anniversary Second year Anniversary Level 3
Re: 08 S electromic quickstop
« Reply #1 on: January 05, 2019, 04:47:12 pm »
I think the guy didn't know what he was doing and mounted the bar wrong. Remove the chain cover,make sure the chain adjuster pin is in it's hole in the bar,get it sitting properly on the studs,put the cover on not too tight adjust the tensioner screw while holding the tip of the bar UP,then while still holding it tighten the cover bolts well. Chain should be snug but still turn without too much difficulty. Good cutting! Also check the oil hole in the bar is clear when you have it off.
Experience builds real horsepower...
When the hammer drops the BS stops:Loggers sports competition!