Author Topic: 090 fan/flywheel removal (Read 335 times)

aclarke · « **on:** November 19, 2014, 08:43:00 pm »

Any special tools or technique to remove fanwheel from flywheel?

neil · « **Reply #1 on:** November 19, 2014, 08:57:34 pm »

pretty sure they are just screwed onto the flywheel Adam, there is one here at work I could look at later.

aclarke · « **Reply #2 on:** November 19, 2014, 09:56:01 pm »

Neil. hope all is well in Aus

Helping a friend get this thing apart Unscrewed the four machine screws and it seems to be locked on from age.

ChoppinBill · « **Reply #3 on:** November 19, 2014, 10:33:23 pm »

There was a paper installed between fanwheel and flywheel - with age it seems to glue the two pieces
together. A slight tap against fanwheel at odd angles will get it separated- usually - But do not hit it too
hard or will have several pieces rather than just two parts.....

mcbob · « **Reply #4 on:** November 19, 2014, 10:48:02 pm »

Theres the correct puller needed for the flywheel 4 screws hold the fan on

stihls066 · « **Reply #5 on:** November 20, 2014, 12:44:01 am »

Just to clarify its a lightning not a standard 090. No threads on inside of flywheel hub like the 090 has. If aclarke is referring to the same friend.

aclarke · « **Reply #6 on:** November 20, 2014, 01:04:09 am »

No threads inside the hub for pulling! I figured my standard Stihl puller sets would work but no dice. Thks for the input

neil · « **Reply #7 on:** November 20, 2014, 02:53:16 pm »

Quote from: aclarke on November 19, 2014, 09:56:01 pm

Neil. hope all is well in Aus

Helping a friend get this thing apart Unscrewed the four machine screws and it seems to be locked on from age.

All is good here in Oz mate, 1 meet to go this Saturday to finish off our racing season, been a long season this year.
I agree with choppinbill, the fan and flywheel do stick sometimes and need a little tap, a puller is needed for flywheel removal.
I have not had anything to do with the old lightning's.

aclarke · « **Reply #8 on:** November 20, 2014, 03:05:18 pm »

Good deal Neil!
Fanwheel came off and this saw has the internally threaded flywheel so the 26x1.5 Stihl puller should work. Thks guys...

mcbob · « **Reply #9 on:** November 20, 2014, 05:25:44 pm »

Same puller works on the Stihl 660 Adam

Chainsaw Repair

News:

Author Topic: 090 fan/flywheel removal (Read 335 times)

aclarke

090 fan/flywheel removal

neil

Re: 090 fan/flywheel removal

aclarke

Re: 090 fan/flywheel removal

ChoppinBill

Re: 090 fan/flywheel removal

mcbob

Re: 090 fan/flywheel removal

stihls066

Re: 090 fan/flywheel removal

aclarke

Re: 090 fan/flywheel removal

neil

Re: 090 fan/flywheel removal

aclarke

Re: 090 fan/flywheel removal

mcbob

Re: 090 fan/flywheel removal

Related Topics