Author Topic: 12 inch picco 026 ported (Read 257 times)

Cut4fun . · « **on:** January 07, 2016, 02:47:23 pm »

Bar even a stock 026 could handle = 12"

.

The test runs were fun with it turned down to 14.5's.

concretegrazer · « **Reply #1 on:** January 07, 2016, 03:02:05 pm »

Makes the saw look big.

Cut4fun . · « **Reply #2 on:** January 07, 2016, 03:04:24 pm »

Makes the saw look big.

I thought so too. Boy it was fun tuning with stock chain.

Cut4fun . · « **Reply #3 on:** January 07, 2016, 03:05:06 pm »

Got to remember to pull the dawg off.

mdavlee . · « **Reply #4 on:** January 07, 2016, 03:23:22 pm »

Looks like fun for cants but be a pain cutting firewood with no reach.

660magnum · « **Reply #5 on:** January 07, 2016, 04:21:51 pm »

The saw is a limbing sweetheart with a 16" bar.

ch74 · « **Reply #6 on:** January 07, 2016, 05:39:28 pm »

That thing looks sweet. I bet that german thing is a runner.

ch74 · « **Reply #7 on:** January 07, 2016, 07:22:03 pm »

I just can't get over how bad ass that little thing looks. It kinda looks like a toy from the pic.

3000 FPS · « **Reply #8 on:** January 07, 2016, 08:08:04 pm »

Alright Kevin looks like you got all figured out now. This should be interesting. The ones with the more aggressive rakers should do pretty good.

Chainsaw Repair