Author Topic: Bought some more saws (Read 407 times)

jmester · « **on:** December 24, 2015, 09:36:15 pm »

Got a hand full of saws today. All parts or not working.
200t / 009 / screw cap 046 / 2-290 / 029 super / 025 / husky 350

Looks like some need just some basic stuff to get going. Some are just parts saws. And a whole lotta cleaning.

Cut4fun . · « **Reply #1 on:** December 24, 2015, 09:44:50 pm »

I havent come across a good deal on a bunch in a long time. To many locals out about.

jmester · « **Reply #2 on:** December 24, 2015, 11:49:42 pm »

Came from a landscaper buddy of mine. Not sure what to do with them all. To be honest I really did not want all of them just a 2. But he wanted them all gone. So here I am. The 200t and 009 are very nice looking. The other are nice to but he scratched some kind of id number in the plastics. Kind of disappointing as the 046 plastics are beautiful.

I am going to start on the 200t. I will post some pics along the way.

jmester · « **Reply #3 on:** December 25, 2015, 04:11:45 pm »

Pulled the screws out of the 200t muffler to see what was inside for a muffler mod. Not much in there I will just need to add another hole. Service manual says to use scotch weld on seam of the muffler as any exhaust leak will melt the plastic. I have search around to find some but can't seem to find any besides a whole case. What would you guys use to make sure there is a tight seal on the seam? Or just put the screws back in and run it.

Cut4fun . · « **Reply #4 on:** December 25, 2015, 07:15:19 pm »

Only thing a 200T muffler needed was the screen pulled out. JMO. Mine was a runner stock with just that and carb work rebuild and fine tunning.

jmester · « **Reply #5 on:** December 25, 2015, 07:42:36 pm »

You are correct. But I just had to know what the inside looked like. Think I will just screw the halves back together and run it.

3000 FPS · « **Reply #6 on:** December 25, 2015, 10:01:53 pm »

There is a copper seal that you can get from the local auto parts store. You might try that.

Cut4fun . · « **Reply #7 on:** December 26, 2015, 10:06:54 am »

Quote from: jmester on December 25, 2015, 07:42:36 pm

You are correct. But I just had to know what the inside looked like. Think I will just screw the halves back together and run it.

I had pics saved somewhere. Finding them of the insides that I had found would be a different story though.

Cut4fun . · « **Reply #8 on:** December 26, 2015, 10:25:14 am »

Cant find the inside muffler pics. But did come across the best stock running 200T I have ran to date.

This saw won racing gtg 40cc under Top Handle class 2 cuts 8x8 with semi chisel chain. Man if we would have had this PS PS3 stuff back then.

Cant cutting she like around 14.7K if I remember right.

As soon as the gtg was over i had promised it to a UP MI tree guy. He said this saw ate his other 2 or 3 stock 200's.

3000 FPS · « **Reply #9 on:** December 26, 2015, 11:25:22 am »

Nice bunch of saws. Good score on that.

Chainsaw Repair

News:

Author Topic: Bought some more saws (Read 407 times)

jmester

Bought some more saws

Cut4fun .

Re: Bought some more saws

jmester

Re: Bought some more saws

jmester

Re: Bought some more saws

Cut4fun .

Re: Bought some more saws

jmester

Re: Bought some more saws

3000 FPS

Re: Bought some more saws

Cut4fun .

Re: Bought some more saws

Cut4fun .

Re: Bought some more saws

3000 FPS

Re: Bought some more saws

Related Topics