Author Topic: Bow Bars  (Read 2087 times)

0 Members and 0 Guests are viewing this topic.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2083
  • Karma: 161
  • Location: MD
Bow Bars
« on: July 17, 2012, 06:05:33 pm »
Does anyone know where I can still find some bow bars forsale. In new or slightly used. Thanks in advance for your help.
FEAR NO TREE. FEAR GOD.

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bow Bars
« Reply #1 on: July 17, 2012, 08:03:20 pm »
You can get new bow bars from these people


http://www.chainbar.com/products.html

Chain Bar Repairing
5425 S.E. Johnson Creek Blvd. Portland, Oregon 97222
TOLL FREE 1-877-SAW-BARS
Tel: 503-774-4266 Fax: 503-774-4266
Email: info@chainbar.com
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2083
  • Karma: 161
  • Location: MD
Re: Bow Bars
« Reply #2 on: July 17, 2012, 08:39:07 pm »
I have been in touch with them. They only have smaller ones for limbing and Christmas trees. I am looking for one I can cut firewood with.
FEAR NO TREE. FEAR GOD.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bow Bars
« Reply #3 on: July 17, 2012, 09:07:52 pm »
I noticed in the pictures that they showed the bow bars with the small front.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2083
  • Karma: 161
  • Location: MD
Re: Bow Bars
« Reply #4 on: July 17, 2012, 09:10:54 pm »
Looks like they may be the only option.
FEAR NO TREE. FEAR GOD.

Offline Tzed250

  • 4 cube
  • **
  • Posts: 30
  • Karma: 4
Re: Bow Bars
« Reply #5 on: July 18, 2012, 10:04:52 pm »
eBay is a source for bow bars.

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2083
  • Karma: 161
  • Location: MD
Re: Bow Bars
« Reply #6 on: July 18, 2012, 10:39:44 pm »
Thanks for everyones help. I found one on eBay should have it in a couple of days.
FEAR NO TREE. FEAR GOD.

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Bow Bars
« Reply #7 on: July 20, 2012, 01:01:12 pm »
If you're going to use one of those things make certain all the quards and the spike is in place because they will kick back if you mess up .They'll cut to beat the band but you have to be carefull with them .

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Bow Bars
« Reply #8 on: July 20, 2012, 03:11:48 pm »
When I was a kid, where I lived, all chainsaws had bows. There was a rack made up above the cab of the pulpwood trucks and you could see the saws up on the rack when the tag axle truck went by with a load of pulp wood setting cross ways.

The only chainsaw I was around early in the 50's, that wasn't a bow saw, was a 2 man McCulloch that the tree service guys were using to fell and buck a tree. The guy swinging on the rope had a hand saw. No bucket trucks.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Al Smith

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2778
  • Karma: 179
Re: Bow Bars
« Reply #9 on: July 20, 2012, 04:52:43 pm »
I acquired one just about like the bow I operated in the mid 60's on a Mac 250 cutting fence posts .It worked fine but if it was any faster or handier than the modern small saws we have today I can't say but I doubt it .

I'd about imagine you could take a three cuber and do just about as well on that sized stuff .If nothing else as a reference with a 3 cube and a 16 " bar you got maybe 11-12 pounds .An 80 cc McCulloch reed valve with a 24" bow bar maybe 25-30 .Which one do you think will tucker you out faster ?

 

Related Topics

  Subject / Started by Replies Last post
11 Replies
201 Views
Last post September 27, 2013, 01:12:17 pm
by Cut4fun
4 Replies
321 Views
Last post December 05, 2014, 01:20:49 pm
by bigblackdodge
17 Replies
906 Views
Last post December 02, 2013, 03:51:23 pm
by jmester
12 Replies
434 Views
Last post December 27, 2013, 10:04:43 am
by Cut4fun .
0 Replies
125 Views
Last post January 01, 2014, 07:28:04 pm
by stihls066
8 Replies
764 Views
Last post July 13, 2014, 12:16:19 pm
by Cut4fun .
5 Replies
222 Views
Last post January 02, 2018, 07:30:56 am
by Cut4fun .
7 Replies
217 Views
Last post February 23, 2018, 01:45:20 pm
by Cut4fun .
8 Replies
314 Views
Last post January 23, 2019, 09:20:10 pm
by trappermike
1 Replies
139 Views
Last post May 11, 2019, 09:49:35 am
by Cut4fun .