Author Topic: 011 AV  (Read 1038 times)

0 Members and 0 Guests are viewing this topic.

Offline Remington

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 2
Re: 011 AV
« Reply #30 on: February 28, 2013, 05:09:27 pm »
Any suggestions here for a fuel line work around.  The dealer was a snake and pretended its generic because he didn't want to order a $5 part.

 Of course it isn't generic and the first tygon I tried is too thin and leaks and the one he sold me yesterday is too thick and can't even be pushed in with a screwdriver.

I'm trying to avoid having to go back there for a $5 sale, since I'm not buying a kubota tractor for cash they get really upset.

Offline man of stihl

  • Nitro Hotsaw
  • *******
  • Posts: 1219
  • Karma: 71
  • NW PA
  • Location: nw pennsylvania
Re: 011 AV
« Reply #31 on: February 28, 2013, 05:57:56 pm »
You could drill out the hole to fit your new fuel line. Or theres always Ebay
Ron

Offline Remington

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 2
Re: 011 AV
« Reply #32 on: February 28, 2013, 08:53:23 pm »
Drilling was my first idea but I didn't want screw it up.  I found something better and a temp fix is in.

I took the end of a old fuel filter and snipped it and cut the fuel line halfway and inserted the fuel filter piece to act as a coupler. It expanded the tygon just enough to make a good fit at the wall. I will try to find a longer coupler but this fix is fine for now.

Offline Remington

  • 5 cube
  • ***
  • Posts: 110
  • Karma: 2
Re: 011 AV
« Reply #33 on: February 28, 2013, 10:58:36 pm »
Here it is 20 minutes ago with the new tygon lines.  The vent hose is just dangling in the hole but it works great as is. That was some dead wood but it did go through pretty fast

Offline jmester

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 2056
  • Karma: 157
  • Location: MD
Re: 011 AV
« Reply #34 on: March 03, 2013, 11:50:40 am »
Some 015's have the same design of individual roller bearings,with a removable rod.
FEAR NO TREE. FEAR GOD.