Author Topic: Carb rebuild ??  (Read 190 times)

0 Members and 0 Guests are viewing this topic.

Offline huntindog

  • 3 cube
  • *
  • Posts: 12
  • Karma: 0
    • Bluecollarbrittanys
Carb rebuild ??
« on: November 07, 2013, 04:39:05 pm »
So I decided to go ahead and put a kit in carb of my 036 Pro while I have it apart for the top end.
I watched a video on Utube to see what it looked like inside first.
I have it apart now, and see a small triangular piece that looks to be aluminum press fit? into the carb body next to the needle/seat. There is a replacement in my kit. What does this piece cover? is it press fit or glued?
Martin, 5 Britts FC/AFC Martin's Rusty Diamond Hunter MH 1999-2010
FC/AFC Hang'em High Talon Hunter MH
FC/AFC Martin's Flight over Denali
FC/AFC Blue Collar's High Stakes Poker
Talon's Hope of a BlueCollar Gunrunner

Share on Facebook Share on Twitter


Offline Fish

  • Piped Saw
  • *****
  • Posts: 309
  • Karma: 39
Re: Carb rebuild ??
« Reply #1 on: November 07, 2013, 04:42:06 pm »
It is a "welch" plug, concaved in shape, so once in place, the top can be "tapped" with a punch and the bottom expands to fit tight, they usually seal it too....

I would advise that you leave it alone.....

Offline sharkey

  • Piped Saw
  • *****
  • Posts: 367
  • Karma: 37
Re: Carb rebuild ??
« Reply #2 on: November 08, 2013, 05:50:01 am »
The small plate covers the idle fuel feed holes.  The manufacturer cannot drill those holes without adding the plate.  Flush the area with solvent through the idle jet and like Fish recommended, leave the plate alone. 

 

Related Topics

  Subject / Started by Replies Last post
22 Replies
2066 Views
Last post January 26, 2014, 10:18:49 pm
by KilliansRedLeo
3 Replies
531 Views
Last post January 23, 2016, 10:29:14 pm
by mikehonda
3 Replies
367 Views
Last post June 30, 2012, 10:04:41 am
by mgshiho
8 Replies
601 Views
Last post February 01, 2013, 03:10:13 pm
by 660magnum
4 Replies
193 Views
Last post November 07, 2013, 10:09:10 pm
by Gregsl
12 Replies
506 Views
Last post November 16, 2013, 06:47:39 am
by NHRA1877
35 Replies
1130 Views
Last post November 11, 2016, 11:28:35 pm
by pete
15 Replies
675 Views
Last post July 19, 2014, 03:56:02 pm
by vidaliaman
3 Replies
272 Views
Last post June 30, 2015, 07:11:44 pm
by Jason K
5 Replies
385 Views
Last post April 04, 2016, 06:01:17 am
by Al Smith