Author Topic: Clarify the sizes and no's for the Stihl saws  (Read 200 times)

0 Members and 0 Guests are viewing this topic.

Offline rls8836

  • 3 cube
  • *
  • Posts: 16
  • Karma: 1
Clarify the sizes and no's for the Stihl saws
« on: March 14, 2017, 10:35:41 pm »
It's confusing to me about the numbering and I'd. Of a Stihl saw. Like a 026, I have read where some guys love them. Saw a 025 today, they seem small and not a large cc. I am cutting 3 large sweet gums down and looking for a Stihl chainsaw at a pawn shop to fulfill my needs. First tree is 49-50" diameter at the bottom. Others are smaller somewhat. Cut the first tree with my Timber-master, Poulan 3300 with 20" bar. Still lack the bottom 6' cutting up small enough for the city pick up guys. Wanting a saw with more umpph. Probably a little longer bar also. Would you all recommend what size Stihl would be suitable and please explain the numbering of these saws some. Like if you have a certain no.saw how do you know like the age of the saw ( yr.) I found 4-5 Husqvarnas today. They were either 450 or 455 Ranchers today at a pawn shop. Not sure if they are bigger and big enough for me to go ahead with my cutting. Got my Poulan here in my town at a Poulan factory that was reconditioned probably10-15 yrs. ago.The local saw shop I go to says it was a ok Poulan. That mine was not a Lowes quality Poulan. Anyway I'm looking for a Stihl, probably the last one I will ever buy. I take good care of them with maintanence. Can I buy one in good shape? Or **** poor shape at the pawn shops. Put an ad in Craigslist today looking for a 25"-26" bar, 50-70cc. Preferably the larger cc.  What identication no. on the Stihl be for the size I am asking about. What's the gas/oil mixture ratio for the Stihl saws and Are the Chains anymore expensive for a Stihl. Do I buy a certain name brand chain? I know I have seen and bought a Stihl brand chain before for my father-on-laws smaller Stihl. Please educate me, I want to make the best decision for my purpose. Again explain the numbering on these Stihl saws. Thanks

Share on Facebook Share on Twitter


Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Clarify the sizes and no's for the Stihl saws
« Reply #1 on: March 15, 2017, 09:07:36 am »
Poulan 3300 is a 54cc bare bore cylinder saw. Heck of a saw and my dad has owned and used one since late 80's.  Check impulse line very common need on these.  Fuel lines too. Sometimes need a intake boot and rubber av's. I consider this a pro grade saw and will eat a stihl 026 49cc 260 50cc lunch on it's best day. ;)

So skip a 026 260 IMO and jump up to 60cc 70cc pro or 64cc homeowner plastic type saw in stihl to out cut a 3300. JMO   I would look at the used market stihl 036 360 62cc or stihl 361 59cc, skip the OE 362 look for NE T2 362 59cc if looking at 362. Look for 044 440 70.7cc over the 441 IMO.  046 460 461 76.5cc
Homeowner plastic stihl 039 390 64cc or even the 311 newer seems strong for 59cc. But dont see where gaining much cc wise over the poulan 3300 54cc.  391 is 64cc but not very favorable feedback on them.
REDNECK Saw Repair Getter Done

Offline rls8836

  • 3 cube
  • *
  • Posts: 16
  • Karma: 1
Re: Clarify the sizes and no's for the Stihl saws
« Reply #2 on: March 15, 2017, 10:01:33 am »
Cut4fun thanks for the info. I really do not know my own saw very well. I never realized my saw was 54cc.
 I think I will go to my local saw shop this morning and buy new fuel lines, fuel filter and replace or thoroughly clean my air filter. I did a little more research it says my saw was introduced in 1987. It's not as small as I thought it was. I assumed 3300 means 33cc. See what I mean when asking about the nomenclature of saws. If I have never had a Stihl or maybe even a Husqvarna then these no.s are very misleading. Like 026, I assume something like 26cc. Thanks for making me think more about what is actually in front of me. Things are not as they appear sometimes.
Will clean my saw up again and service it and re- attack that tree butt again. Thanks for your reply.

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 21945
  • Karma: 533
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Clarify the sizes and no's for the Stihl saws
« Reply #3 on: March 15, 2017, 12:53:24 pm »
Echo black 3mmx5mm or 3mm x 6mm for IMPULSE line. Base of cylinder left side or right below cylinder on crankcase. to the top of the carb.

Echo 3mmx5mm works for the fuel line too.
REDNECK Saw Repair Getter Done

Offline bulletpruf

  • 3 cube
  • *
  • Posts: 12
  • Karma: 2
Re: Clarify the sizes and no's for the Stihl saws
« Reply #4 on: March 16, 2017, 04:37:50 am »
RLS -

Where are you located?  That would help us a bit in recommending a saw for you; I'm thinking we could help you find some pretty good ones on your local Craigslist.

Bottom line - you should be able to find a nice used Stihl pro saw in 50-70 cc without venturing too far from home.

Scott

 

Related Topics

  Subject / Started by Replies Last post
1 Replies
274 Views
Last post March 27, 2012, 01:11:06 pm
by Cut4fun .
24 Replies
1420 Views
Last post October 25, 2012, 08:45:50 am
by Al Smith
9 Replies
450 Views
Last post January 24, 2014, 01:18:49 pm
by Cut4fun .
9 Replies
1339 Views
Last post February 02, 2014, 07:45:35 pm
by countryhog
2 Replies
116 Views
Last post April 14, 2015, 08:48:14 pm
by deereguy
0 Replies
340 Views
Last post August 16, 2015, 03:19:40 am
by 660magnum
2 Replies
162 Views
Last post May 07, 2016, 02:39:51 pm
by jmester
New to Stihl saws

Started by roccus « 1 2 » Stihl

10 Replies
274 Views
Last post January 25, 2017, 11:40:38 pm
by roccus
0 Replies
79 Views
Last post February 05, 2019, 08:18:46 pm
by Cut4fun .
16 Replies
597 Views
Last post March 02, 2020, 06:07:10 pm
by Al Smith