Author Topic: Does Stihl Still Make A Dual Port Muffler Cover for a MS460? (Read 1654 times)

Jason K · « **on:** March 27, 2016, 08:07:33 pm »

I am holding off on the MS390 deal until later this month. I am buying a 044 from a member on this forum. I am looking for a good part number for a dual port muffler number for stihl that is still good. If they still have them.

Thanks
Jason

Cut4fun . · « **Reply #1 on:** March 27, 2016, 08:15:55 pm »

I been using the raisinman aftermarket with great results. Like $15

Here is one for $15 http://www.sawagain.com/stihl-044-046-ms-440-ms-460-new-dual-port-muffler-cover-mod-new/

STIHL 044, 046, MS 440, MS 460 NEW DUAL PORT MUFFLER COVER 1128 140 0801 11281400801

Cut4fun . · « **Reply #2 on:** March 27, 2016, 08:22:05 pm »

I been getting the whole mufflers for $25-$30 with DP cover, open back with the big back outlet.

More info for ya.

Quote from: Cut4fun . on May 10, 2011, 06:36:34 pm

Just saving some stihl info here.

440/460, 044/046 Dual port cover 1128 140 0801

660/066 DP cover 1122 140 0800

Large felling dawgs
440/460 inner 1122 664 0506
440 outer 1122 664 0501
460 outer 1128 664 0501
660 inner 1122 664 0508
660 outer 1122 664 0503

Ceramic chain catcher fits all 3 1122 650 7700

PNW clutch cover fits all 3 1122 648 0403

361 PNW cover 1138 648 0400

TS400 screen/clip for a muffler mod with a 9/16 pipe.
Screen 4223 141 9000
Clip 4223 141 6600

044 serial X29583701 or below = 10mm wrist pin

Jason K · « **Reply #3 on:** March 28, 2016, 06:01:23 pm »

Where do you get the whole muffler from Cut4fun? Bettter then buying the high price of stihl.

Thanks
Jason

660magnum · « **Reply #4 on:** March 28, 2016, 06:35:21 pm »

There's little noticeable difference except price between OEM and the Aftermarket mufflers from HLS

The HLS mufflers are the same brand as those from Sawagain made in Taiwan

You can get just the dual port covers for all these saws for just $19.95

044/MS440, 046/MS460 $29.95 Dual Port Muffler

http://www.hlsproparts.com/Stihl-044-046-MS440-MS460-replacement-muffler-p/h90046.htm

066/MS660 $34.99 Dual Port muffler

http://www.hlsproparts.com/Stihl-064-065-066-MS640-MS650-MS660-muffler-p/h90066.htm

660magnum · « **Reply #5 on:** March 28, 2016, 06:52:57 pm »

You go inside the muffler and remove the dog house and open the outlets up as much as you can and away it goes - full power

Jason K · « **Reply #6 on:** March 28, 2016, 08:19:17 pm »

Thanks 660.

Jason

Acel83 · « **Reply #7 on:** June 30, 2016, 01:46:57 pm »

I purchased a dp from hlsupply and had major paint chipping after 10 hours of use. It was a hyway very disappointed.

mdavlee . · « **Reply #8 on:** June 30, 2016, 07:06:48 pm »

Paint isn't that important. The stock ones won't hold up much longer. The oem one I bought had the bolt fall out on the screen first time I used it. Was way more pissed about a $40 cover doing that.

Al Smith · « **Reply #9 on:** June 30, 2016, 10:59:18 pm »

It's not a big deal to gut a muffler and cut another hole in the cover.Maybe half an hour with a mini die grinder .If you want paint try the stuff they spray barbeque grills with .

If you want a shroud on one just cut one out of sheet metal and braze it on .If you can't braze use stainless steel pop rivets like they connect flue pipe with.If they can stand up to the heat of a wood stove going full tilt that saw won't even faze them .

Subject / Started by	Replies	Last post
2 stihl 056 factory dual port models (SOLD) Started by stihls066 Locked Sale and Wanted threads	1 Replies 470 Views	October 19, 2013, 11:59:12 pm by stihls066
stihl 084 parts muffler and top cover needed Started by stihls066 Wanted	5 Replies 414 Views	October 10, 2013, 01:06:49 pm by Cut4fun .
390 Dual Port Muffler, my mod. Started by alsled Husqvarna	8 Replies 771 Views	November 14, 2013, 12:31:50 am by 3000 FPS
Dual port muffler mods, various. Started by alsled « 1 2 » Welding Shop	18 Replies 1909 Views	November 22, 2013, 09:55:56 pm by Al Smith
Poulan Pro 295 Clutch Cover and 2-Piece Muffler Started by Eccentric Locked Sale and Wanted threads	2 Replies 566 Views	December 15, 2013, 04:58:39 pm by Eccentric
Dual Port Muffler Experiments Started by KilliansRedLeo « 1 2 3 » How To Basics and Fixes	24 Replies 1950 Views	October 22, 2014, 08:38:44 pm by 3000 FPS
046/460 front muffler cover mod Started by jmester « 1 2 3 » Stihl	29 Replies 1242 Views	February 22, 2016, 11:52:02 pm by 3000 FPS
Open port - closed port - clamshell cylinders Started by Cut4fun . Stickys of How to Basics commonly ask questions	0 Replies 852 Views	April 07, 2016, 01:41:04 pm by Cut4fun .
Dolmar open port/closed port? Started by Giles Dolmar Makita	4 Replies 1128 Views	April 18, 2018, 01:10:06 am by 660magnum
Make Stihl tanks white again Started by Cut4fun . How To Basics and Fixes	2 Replies 670 Views	January 31, 2024, 11:33:59 am by Cut4fun .

Chainsaw Repair

News:

Author Topic: Does Stihl Still Make A Dual Port Muffler Cover for a MS460? (Read 1654 times)

Jason K

Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Cut4fun .

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Cut4fun .

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Jason K

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

660magnum

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

660magnum

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Jason K

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Acel83

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

mdavlee .

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Al Smith

Re: Does Stihl Still Make A Dual Port Muffler Cover for a MS460?

Related Topics