Author Topic: Hot Rod MS180???  (Read 2667 times)

0 Members and 1 Guest are viewing this topic.

Offline roostersgt

  • 3 cube
  • *
  • Posts: 24
  • Karma: 1
  • Location: 5200' Cali
Re: Hot Rod MS180???
« Reply #10 on: February 01, 2014, 12:37:54 am »
I saw that too. It's just that I seriously doubt anyone can get a 170/180 to perform as those depicted in his videos with just those changes. I'm sure you've held one of those saws, or two or three. I don't trust the guy for all the reasons given. I wish a guy could get a mouse saw to perform at that level with by simply making the changes he states he makes. Hell, if that were the case, I should put 72" bar and 10 pin sprocket on my 440 and ditch any need for my bigger saws.
You didn't win silver, you lost gold.

Offline KilliansRedLeo

  • Nitro Hotsaw
  • *******
  • Posts: 2361
  • Karma: 80
  • Location: Rochester, NY
    • RoCHusqvarna
Re: Hot Rod MS180???
« Reply #11 on: February 01, 2014, 09:55:02 am »
I wanna "Race Only" MS180  ::)

Perhaps, designed for stock class midget racers!
"When the people fear the government...you have tyranny....When the government fears the people....you have liberty"

Thomas Jefferson
1743-1826

Offline Adirondackstihl

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 8
  • Location: Champlain, NY
Re: Hot Rod MS180???
« Reply #12 on: February 04, 2014, 01:19:33 pm »
Perhaps, designed for stock class midget racers!

**** soaked midgets!

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 22574
  • Karma: 591
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: Hot Rod MS180???
« Reply #13 on: February 04, 2014, 01:33:52 pm »
We used to have a 40cc and under class at our racing gtg's. Rear handle saws and top handle 2 separate classes. 

 I think it may of been Al that nicknamed the top handle 40cc under class bumble bee's.
REDNECK Saw Repair Getter Done

Offline AKDoug

  • 3 cube
  • *
  • Posts: 8
  • Karma: 2
Re: Hot Rod MS180???
« Reply #14 on: February 05, 2014, 12:05:33 am »
This is a box stock early production MS180 with a well sharpened chain.. It's the best running 180 I have tried.

http://www.youtube.com/watch?v=l47vNwZ80Kg

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4334
  • Karma: 189
  • OHIO REDNECK
Re: Hot Rod MS180???
« Reply #15 on: February 05, 2014, 10:20:53 am »
The first min 1:35 seconds of this video was 40cc under all ran together.  Not all the saws ran are in video.  They all had semi chisel chain on them back then.  Sure would have liked to had the stihl PS or PS3 back then.  Then it would have been squared files too. Both would have been better then what was offered back then IMO.  I ran VXL.

Thinking this cant was a very dry  sycamore.

Red one woods ported redmax 3800 vxl

Grey one woods ported Ryobi redmax 400 semi chisel brand?

White one woods ported Stihl 200 rear handle semi chisel brand?

http://youtu.be/cC5P0FXJ10c
REDNECK Saw Repair

Offline brokenbudget

  • Nitro Hotsaw
  • *******
  • Posts: 900
  • Karma: 67
  • Location: brockville ontario canada
Re: Hot Rod MS180???
« Reply #16 on: February 05, 2014, 12:16:36 pm »
 NICE BUTT BILL! ;D
when I grow up, i wanna be an adult.

Offline 94BULLITT

  • 3 cube
  • *
  • Posts: 24
  • Karma: 4
  • Location: Frederick County, VA
Re: Hot Rod MS180???
« Reply #17 on: February 26, 2014, 11:42:31 pm »
My MS 170 cuts really good for what it is with a muffler mod and adjustble carb.

http://youtu.be/wIVEhiW3s80

Offline adam32

  • Piped Saw
  • *****
  • Posts: 429
  • Karma: 46
Re: Hot Rod MS180???
« Reply #18 on: February 27, 2014, 09:36:57 am »
I asked that guy about his "race only" 880...I asked what coil he's running and he didn't even know what I was talking about! He said with his 10 tooth its a hot saw...so I sent him vids of a few of my 084 and 3120 hot saws...it shut him up.

Offline aclarke

  • Nitro Hotsaw
  • *******
  • Posts: 1676
  • Karma: 172
Re: Hot Rod MS180???
« Reply #19 on: February 27, 2014, 11:58:48 am »
Dude sounds like a real Barney!

 

Related Topics

  Subject / Started by Replies Last post
17 Replies
4965 Views
Last post January 16, 2015, 03:39:40 pm
by Fish
15 Replies
352 Views
Last post September 15, 2014, 09:25:09 pm
by weimedog
1 Replies
80 Views
Last post May 25, 2015, 02:27:07 am
by mortalitool