Author Topic: Identifying stihl parts by # (Read 591 times)

Fish · « **Reply #10 on:** February 20, 2014, 02:17:53 pm »

Well it looks like the mediacat ball has been dropped again........

I must have accidently sent out all of my copies, does someone have a good 2012 copy they can send me, so I can make some more?

fordrocks · « **Reply #11 on:** February 20, 2014, 02:52:45 pm »

I'd love a copy if you can get one Fish. Thanks.

Fish · « **Reply #12 on:** February 20, 2014, 05:34:48 pm »

well the intent behind it was, that whoever got a copy, has to forward 3 copies to the next in line, and so on, so every member will get a copy... But unfortunately, some folks get their copy and ignore their commitment.......

Cut4fun . · « **Reply #13 on:** February 20, 2014, 07:19:26 pm »

There should be several folks past us main ones to be sending their x3 out. I know I shared at least 5 to folks.

fordrocks · « **Reply #14 on:** February 20, 2014, 08:29:00 pm »

I'd be glad to make some copies and send them on if i can get a copy.

blueberrymuzik · « **Reply #15 on:** February 21, 2014, 07:14:39 am »

I'd like to get a copy and will be glad to share with others.

farmboy · « **Reply #16 on:** February 21, 2014, 09:10:09 am »

I apologize to all for not holding up my end. Still haven't figured out how to burn a copy. I had a "Crash" wiped out 8 years of parts and saw data input as well as the program I used to burn copies. Daughter was supposed to help me but her rheumatiod arthritis has been acting up severly. Fish I can mail you the copy you sent me as well as the blank discs. PM me your address if you want that to happen.
Shep

Fish · « **Reply #17 on:** February 21, 2014, 03:56:24 pm »

Yeah, that will work, and I'll send you the one copy back, for a backup, thanks.

Fish · « **Reply #18 on:** February 21, 2014, 04:03:01 pm »

Yeah, the chain letter idea would be great, if it would work out... The cost of the disc ain't too bad, but the few bucks postage gets to add up when you multiply it by several dozen guys. I have never mentioned money, as I never wanted to give the Stihl lawyers anything to go after anyone, as this is
all out of kindness, because the mediacat is the Holy Grail for Stihl nuts, and this info "SHOULD" be available online anyway.

dutchsawdoctor · « **Reply #19 on:** February 24, 2017, 05:14:56 am »

Quote from: farmboy on February 20, 2014, 06:56:03 am

Saw ID:
1106=contra/070/090
1107=07
1108=08S
1109=090G
1110=041
1112=041G
1113=031,032
1114=020
1115=045,056
1116=015
1117=042,048
1118=028
1119=038
1120=009,010,011,012
1121=024,026,MS260
1122=064,066
1123=021,023,025,MS210,MS250
1124=084,088
1125=034,036,MS360
1127=029,039,MS290,MS310,MS390
1128=044,046,MS440,MS460
1129=020T,MS200T
1130=017,018,MS170,MS180
1132=019T,MS191T
1133=MS270,MS280
1135=MS361
1137=MS192
1138=MS441
1139=MS171,MS181,MS211
1140=MS291,MS311,MS391
1141=MS261,MS271,MS281
1144=MS661

This is what I have.
Will post trimmers, etc. if wanted.
Shep

made a correction

Chainsaw Repair

News:

Author Topic: Identifying stihl parts by # (Read 591 times)

Fish

Re: Identifying stihl parts by #

fordrocks

Re: Identifying stihl parts by #

Fish

Re: Identifying stihl parts by #

Cut4fun .

Re: Identifying stihl parts by #

fordrocks

Re: Identifying stihl parts by #

blueberrymuzik

Re: Identifying stihl parts by #

farmboy

Re: Identifying stihl parts by #

Fish

Re: Identifying stihl parts by #

Fish

Re: Identifying stihl parts by #

dutchsawdoctor

Re: Identifying stihl parts by #

Related Topics