Chainsaw Repair

 There is a straight section of wire that extends from the coiled section of wire that connects to the spark plug. At the end of the straight section of wire there is a sharpened 3/16" right angled bend. Stick the spark plug wire end against the coiled section of the wire connector. You then press the sharp 3/16" sharpened  section into the wire. There will be a hole already in the wire. The straight section of the wire should fit snugly against the insulation spark plug wire with the coil portion at the very end. You can then slip the boot back on, until you see the coil in the spark plug opening of the boot. Sometimes a little spit on the inside of the rubber boot makes it easier to slip on.