Author Topic: modding 440 oiler stihl oilers (Read 697 times)

Reddog · « **Reply #30 on:** December 16, 2014, 06:39:08 pm »

Yes, pics show up

Cut4fun · « **Reply #31 on:** December 16, 2014, 06:42:22 pm »

Mike didnt you say you just need to do 1 of the 3?

mdavlee . · « **Reply #32 on:** December 16, 2014, 08:36:22 pm »

Quote from: Cut4fun on December 16, 2014, 06:42:22 pm

Mike didnt you say you just need to do 1 of the 3?

Yes you can do one of 3 or a combination. It only takes .25mm to get the same stroke as the 460 HO oiler over the stock. The 880 oiler has 1.5mm total stroke. The 460 is .9mm on the regular output. 1mm is .0393" so you only need .010" to get a 1/4 mm more stroke. If you go too far you can empty the oil before fuel. Then you have to port the saw to keep up

Chainsaw Repair

News:

Author Topic: modding 440 oiler stihl oilers (Read 697 times)

Reddog

Re: modding 440 oiler stihl oilers

Cut4fun

Re: modding 440 oiler stihl oilers

mdavlee .

Re: modding 440 oiler stihl oilers

Related Topics