Author Topic: Clutch Spring Replacement????  (Read 550 times)

0 Members and 5 Guests are viewing this topic.

Offline riverrocket

  • 4 cube
  • **
  • Posts: 60
  • Karma: 3

  • Total Badges: 13
    Badges: (View All)
    One year Anniversary Avatar Level 3 50 Posts Mobile User Karma
Clutch Spring Replacement????
« on: April 18, 2013, 07:27:16 pm »
I Bought a used MS440 It's in really nice shape I'm going over it and just want to make sure everything is working like it should. I ordered a new clutch drum,Sprocket and bearing and wanted to make sure the clutch springs are ok. How do you test the springs? and How hard is it to change the springs?
is there a trick to it? Thanks for any advice

Share on Facebook Share on Twitter


Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Clutch Spring Replacement????
« Reply #1 on: April 18, 2013, 07:52:31 pm »
If the clutch lever snaps over center each way the spring is OK

It is too much trouble to get the spring back into place to take it out and look at it for the sake of having done it.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Adirondackstihl

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 8
  • Location: Champlain, NY

  • Total Badges: 22
    Badges: (View All)
    Third year Anniversary Level 5 Second year Anniversary Search Karma Good 100 Posts
Re: Clutch Spring Replacement????
« Reply #2 on: April 18, 2013, 08:16:53 pm »
If the clutch lever snaps over center each way the spring is OK

It is too much trouble to get the spring back into place to take it out and look at it for the sake of having done it.

Sounds like you are referring to the brake band spring and not the clutch springs like the OP intended.

Clutch springs are inexpensive and easily replaced.
I just do em one at time using a pair of needle nose pliers.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Clutch Spring Replacement????
« Reply #3 on: April 18, 2013, 08:46:24 pm »
Sorry about that
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Adirondackstihl

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 8
  • Location: Champlain, NY

  • Total Badges: 22
    Badges: (View All)
    Third year Anniversary Level 5 Second year Anniversary Search Karma Good 100 Posts
Re: Clutch Spring Replacement????
« Reply #4 on: April 18, 2013, 08:48:01 pm »
Apology accepted  ;D

Offline riverrocket

  • 4 cube
  • **
  • Posts: 60
  • Karma: 3

  • Total Badges: 13
    Badges: (View All)
    One year Anniversary Avatar Level 3 50 Posts Mobile User Karma
Re: Clutch Spring Replacement????
« Reply #5 on: April 19, 2013, 04:45:34 am »
Thanks.... 660 I should have been more specific that I was referring to the three springs on the  clutch
I thought it should be an easy job, but  thought i better ask first.
Can the springs be replaced without taking the clutch off?
I've run into a couple clutches that where a SOB to spin loose.



Offline Adirondackstihl

  • 6 cube
  • ****
  • Posts: 176
  • Karma: 8
  • Location: Champlain, NY

  • Total Badges: 22
    Badges: (View All)
    Third year Anniversary Level 5 Second year Anniversary Search Karma Good 100 Posts
Re: Clutch Spring Replacement????
« Reply #6 on: April 23, 2013, 08:26:29 am »
Can the springs be replaced without taking the clutch off?

Yes!

I replaced all clutch springs on my 044 last night in about 5min.
An offset pair of needle nose pliers are your friend.

Offline riverrocket

  • 4 cube
  • **
  • Posts: 60
  • Karma: 3

  • Total Badges: 13
    Badges: (View All)
    One year Anniversary Avatar Level 3 50 Posts Mobile User Karma
Re: Clutch Spring Replacement????
« Reply #7 on: April 23, 2013, 08:51:32 pm »
Thanks again for the info.  I just put a new OEM clutch drum, rim sprocket and bearing on the saw. the bearing fits the crank nice and tight (no slop)
But this saw still has a ringing coming from the clutch area. would weak clutch springs cause the ringing sound
the ping-ping-ping metallic sound some saws make just sounds to loud from this saw. I'm gonna put new springs on it now to see if it makes a difference.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: Clutch Spring Replacement????
« Reply #8 on: April 23, 2013, 09:29:04 pm »
I have a saw that ring-a-dings. I put a new clutch spider, shoes, and spring in it and the ringing still persists. The drum is tight on the bearing and crank. I had bought a new drum but it was made for a older version saw and wouldn't drive the pump.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

 

Related Topics

  Subject / Started by Replies Last post
3 Replies
1017 Views
Last post November 06, 2013, 05:35:04 pm
by Captain Howdy
6 Replies
680 Views
Last post December 15, 2013, 01:15:21 pm
by 3000 FPS
2 Replies
396 Views
Last post January 01, 2014, 10:09:00 am
by KilliansRedLeo
3 Replies
304 Views
Last post May 20, 2014, 01:45:58 pm
by jcsmith
4 Replies
368 Views
Last post September 27, 2014, 03:49:39 pm
by jmester
3 Replies
380 Views
Last post November 10, 2015, 11:28:35 am
by dannyupsolate
4 Replies
735 Views
Last post January 31, 2018, 03:35:12 pm
by Cut4fun .
4 Replies
609 Views
Last post February 04, 2020, 07:50:59 pm
by waltergorman
10 Replies
895 Views
Last post September 23, 2020, 09:52:06 pm
by Spike60
6 Replies
528 Views
Last post February 11, 2021, 07:46:54 am
by Cut4fun .