« previous next »
Pages: [1]   Go Down

Author Topic: MS290 Carb .. Limter caps and right rpms  (Read 427 times)

0 Members and 0 Guests are viewing this topic.

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
MS290 Carb .. Limter caps and right rpms
« on: May 12, 2014, 08:13:31 pm »
I just got done rebuilding my carb and setting rpms on my MS290. One of many saw projects..lol..I was wondering if I got the rpms right ..High 12300-12500 rpm from what my tach says.I do like to run saws alittle on the rich side.  Do I have to put back on them pesky limiter caps on the carb so it holds adjustment right?

Thanks
Jason
Logged

Share on Facebook Share on Twitter

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: MS290 Carb .. Limter caps and right rpms
« Reply #1 on: May 12, 2014, 08:15:50 pm »
Rpm is OK and you can leave the caps off if that's what you want to do.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: MS290 Carb .. Limter caps and right rpms
« Reply #2 on: May 12, 2014, 08:23:40 pm »
I do not what to put them back on if I do not have too. On the other hand I don't feel like adjusting everyday either or at all.So will it stay put where I have it  w/o backing in or out on the adjustments I made for it?
Logged

Offline H 2 H

  • 5 cube
  • ***
  • Posts: 100
  • Karma: 11
  • Location: Were the Pacific Northwest Soft Woods Grow
Re: MS290 Carb .. Limter caps and right rpms
« Reply #3 on: May 12, 2014, 09:20:53 pm »
Yeah leave the caps off

It isn't uncommon to adjust the H & L during a day of cutting it just depends on the weather from a sunny day to a cloudy day in a matter of minutes here in the PNW  :o
Logged
"People ask me where all my money went, I tell them half of it I spent on gambling, fast women and liquor, the other half I wasted!" W.C.

"..... nothing more funnier than watching some ole coot make a fool out of himself, especially sideways”

"You can't argue with someone that doesn't have any real life experience on the subject."

Offline 3000 FPS

  • Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 4654
  • Karma: 314
  • Location: Carpenter, Wyoming
Re: MS290 Carb .. Limter caps and right rpms
« Reply #4 on: May 14, 2014, 12:30:17 am »
I adjust my saws all the time also.   One day is cold one day it is warm.   I just always carry a small screw driver with me.
Logged
PP 505, 475, 445.

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: MS290 Carb .. Limter caps and right rpms
« Reply #5 on: May 14, 2014, 11:31:48 pm »
I just don't want them backing out or going in as I use it. I on the norm have a screw driver with at all times.I just don't adjust daily more like every two or three days I will check rpms with the tach before I use it. It is going be seen a lot of use this spring and summer as the weather permits.

Jason
Logged

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: MS290 Carb .. Limter caps and right rpms
« Reply #6 on: May 15, 2014, 02:07:55 am »
I've not had a problem with them moving while running the saw.
Logged
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun .

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 23135
  • Karma: 647
  • OHIO REDNECK Saw Repair Getter Done
    • Redneck Chainsaw Repair
Re: MS290 Carb .. Limter caps and right rpms
« Reply #7 on: May 15, 2014, 11:05:00 am »
Even though some people swear you have to put the red plastic stops back on. I havent ever seen any I pulled creep yet without.  I leave them off.

Heck what sold me on the idea was when I took a MS361 in on trade from a feller that ran it commercial without the red plastic stop. I ran the saw after having to adjust for my area and it never moved. So that sold me on you dont have to put the red stops back on.

Now adjustments for weather yes.  ;)
Logged
REDNECK Saw Repair Getter Done

Offline H 2 H

  • 5 cube
  • ***
  • Posts: 100
  • Karma: 11
  • Location: Were the Pacific Northwest Soft Woods Grow
Re: MS290 Carb .. Limter caps and right rpms
« Reply #8 on: May 15, 2014, 12:03:36 pm »
Never had a problem having the H & L screws backing out on that series of saws

There has been atleast one of that series of saw at my place since the late 80's
Logged
"People ask me where all my money went, I tell them half of it I spent on gambling, fast women and liquor, the other half I wasted!" W.C.

"..... nothing more funnier than watching some ole coot make a fool out of himself, especially sideways”

"You can't argue with someone that doesn't have any real life experience on the subject."

Offline Jason K

  • 6 cube
  • ****
  • Posts: 190
  • Karma: 7
  • Location: Iowa
Re: MS290 Carb .. Limter caps and right rpms
« Reply #9 on: May 17, 2014, 11:06:56 pm »
Thanks for the replies everyone. I am glad I can leave off them caps. I will check with a tach when ever I use it.Being I like to run on the alittle on the rich side.


Jason
Logged
Pages: [1]   Go Up
« previous next »
 

Related Topics

  Subject / Started by Replies Last post
MS290 MM

Started by Kenskip1 Stihl

6 Replies
562 Views 		Last post December 24, 2011, 05:38:54 am
by Al Smith
3 Replies
506 Views 		Last post June 29, 2012, 12:09:17 pm
by SawTroll
12 Replies
654 Views 		Last post March 01, 2013, 07:47:12 am
by dynodave
28 Replies
1479 Views 		Last post November 08, 2015, 01:28:42 am
by wild262
6 Replies
263 Views 		Last post October 28, 2013, 07:16:46 pm
by jmester
ms290

Started by gunrac « 1 2 3 » Stihl

28 Replies
805 Views 		Last post February 24, 2014, 01:39:48 pm
by Cut4fun
8 Replies
580 Views 		Last post March 30, 2014, 03:17:42 pm
by Bluegill
8 Replies
441 Views 		Last post April 13, 2014, 10:13:50 pm
by 3000 FPS
3 Replies
199 Views 		Last post August 15, 2014, 11:59:14 am
by Cut4fun
1 Replies
249 Views 		Last post March 15, 2020, 11:20:55 pm
by ssidwell