Author Topic: ms441c  (Read 1615 times)

0 Members and 10 Guests are viewing this topic.

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: ms441c
« Reply #20 on: November 17, 2013, 04:00:57 am »
There'll be a front coming through there tomorrow and the weather will return to be more seasonable but keep in mind that the mixture will need to be richer in a few weeks than what it will be today as the temperature gets much colder.

Cold weather the non electronic mixture control saws run leaner.
and in the hot summer time, the same saw adjusted for the dead of winter will be pig rich.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline don5477

  • 4 cube
  • **
  • Posts: 54
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    One year Anniversary 50 Posts 10 Posts Level 3 Karma Topic Starter
Re: ms441c
« Reply #21 on: November 17, 2013, 12:34:38 pm »
its an m-tronic wouldn't it make the tuning it self for the cold or warm weather, or are you telling me i will see a difference in the way its going to run for warm and cold weather

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: ms441c
« Reply #22 on: November 17, 2013, 12:42:44 pm »
If it's a M-tronic forget all the needle valve stuff.
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline don5477

  • 4 cube
  • **
  • Posts: 54
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    One year Anniversary 50 Posts 10 Posts Level 3 Karma Topic Starter
Re: ms441c
« Reply #23 on: November 17, 2013, 12:54:31 pm »
ok thanks it is an m-tronic

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: ms441c
« Reply #24 on: November 17, 2013, 12:57:49 pm »
There's a tech manual floating around on the M-Tronic for the 441. I'd have to E-mail it to you?
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline don5477

  • 4 cube
  • **
  • Posts: 54
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    One year Anniversary 50 Posts 10 Posts Level 3 Karma Topic Starter
Re: ms441c
« Reply #25 on: November 17, 2013, 01:11:28 pm »
There's a tech manual floating around on the M-Tronic for the 441. I'd have to E-mail it to you?
i sent you my email in a pm

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO

  • Total Badges: 39
    Badges: (View All)
    Seventh year Anniversary Sixth year Anniversary Fifth year Anniversary Fourth year Anniversary 5000 Posts Third year Anniversary
Re: ms441c
« Reply #26 on: November 17, 2013, 01:28:38 pm »
Look in your mail
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: ms441c
« Reply #27 on: November 17, 2013, 03:24:45 pm »
The best way to break in a saw is to run the snot out of it.  I sure hope you got a quality cylinder kit.  Many of the white box ones from eBay are nothing but trouble.
the one i got is from here http://www.hlsproparts.com/Stihl-MS441-Big-Bore-Nikasil-cylinder-kit-p/h30441-b.htm   is it ok or should i put the oem stock back on

Keep us up to date on yours if it last without fail OK. Thanks.   

Offline Cut4fun

  • Administrator
  • Nitro Hotsaw
  • *******
  • Posts: 4666
  • Karma: 216
  • OHIO REDNECK

  • Total Badges: 44
    Badges: (View All)
    Tenth year Anniversary Nineth year Anniversary Eighth year Anniversary Level 7 Seventh year Anniversary Apple User
Re: ms441c
« Reply #28 on: November 17, 2013, 03:26:19 pm »
There's a tech manual floating around on the M-Tronic for the 441. I'd have to E-mail it to you?

Send it to me to, so I can save it and read. Thanks

Offline don5477

  • 4 cube
  • **
  • Posts: 54
  • Karma: 2

  • Total Badges: 14
    Badges: (View All)
    One year Anniversary 50 Posts 10 Posts Level 3 Karma Topic Starter
Re: ms441c
« Reply #29 on: November 17, 2013, 03:54:58 pm »
got the manual and ill let you all know how the saw hold up.thanks a lot guys

 

Related Topics

  Subject / Started by Replies Last post
ms441c

Started by don5477 Stihl

2 Replies
294 Views
Last post October 27, 2013, 11:26:33 pm
by don5477
ms441c

Started by don5477 Stihl

1 Replies
269 Views
Last post November 02, 2013, 07:58:28 pm
by 660magnum
3 Replies
280 Views
Last post November 17, 2013, 05:20:45 pm
by 660magnum
Stihl MS441C

Started by Harvester « 1 2 » Stihl

14 Replies
790 Views
Last post December 13, 2018, 12:09:43 pm
by Cut4fun .