Author Topic: Need Stihl av28 wood boss cylinder torx size (Read 389 times)

ba_50 · « **on:** June 05, 2014, 06:58:04 pm »

Thanks.

Al Smith · « **Reply #1 on:** June 05, 2014, 08:41:58 pm »

goldnomad · « **Reply #2 on:** June 06, 2014, 07:01:25 pm »

Aren't the majority of Stihl saws T27's?

Robert

farmboy · « **Reply #3 on:** June 06, 2014, 09:49:42 pm »

Yep! T-27. Dolmar T-27, Husky is using some T-25 as does Solo.
Shep

3000 FPS · « **Reply #4 on:** June 07, 2014, 12:08:06 am »

Almost all the Torx sizes I see now are T-25 and T-27.

farmboy · « **Reply #5 on:** June 07, 2014, 11:34:27 am »

I've run into 1 that had T-20 can't remember what on. Just remembered Efco 156-165-962 Af base screw IIRC.
Shep

KilliansRedLeo · « **Reply #6 on:** June 07, 2014, 12:29:53 pm »

Husky 365/72 XT saws use T-20 tamper proof on the transfer port outer covers.

3000 FPS · « **Reply #7 on:** June 07, 2014, 03:15:06 pm »

Husky 365/72 XT saws use T-20 tamper proof on the transfer port outer covers.

So is the husky 455.

brokenbudget · « **Reply #8 on:** June 07, 2014, 03:21:28 pm »

tamper proof. sounds like a challenge

3000 FPS · « **Reply #9 on:** June 07, 2014, 04:59:25 pm »

tamper proof. sounds like a challenge

Yea they put the small post right in the middle of the screw, so you need a torx with a small hole on the center. They just want us to by more tools.

Chainsaw Repair