Author Topic: 044 Piston stop advice and how to get clutch off (Read 436 times)

Jez33 · « **Reply #20 on:** January 21, 2017, 03:24:27 pm »

To get my clutch off my promac I took the spark plug off and put the piston at bottom centre then fed a clean rope in the bore to jam the piston, worked a treat

3000 FPS · « **Reply #21 on:** January 21, 2017, 06:56:48 pm »

Quote from: Jez33 on January 21, 2017, 03:24:27 pm

To get my clutch off my promac I took the spark plug off and put the piston at bottom centre then fed a clean rope in the bore to jam the piston, worked a treat

You can do that or leave the plug in and use a 3/8ths impact driver. Just make sure to remember left hand thread for the clutch.

Chainsaw Repair

News:

Author Topic: 044 Piston stop advice and how to get clutch off (Read 436 times)

Jez33

Re: 044 Piston stop advice and how to get clutch off

3000 FPS

Re: 044 Piston stop advice and how to get clutch off

Related Topics