Author Topic: Stihl S10 Disassembly Help  (Read 218 times)

0 Members and 0 Guests are viewing this topic.

Offline Legeance

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
Stihl S10 Disassembly Help
« on: September 11, 2016, 08:27:59 pm »
So I started taking apart an S10 rear handle today to try and get it cleaned and painted. I ran into a problem though because I have no idea how to take the clutch off and no idea how to take the flywheel side off(under the flywheel theres something I haven't seen before but flywheel was taken off) I've attached pictures.
Is it something I have to pull off?

Share on Facebook Share on Twitter


Offline Legeance

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
Re: S10 Disassembly Help
« Reply #1 on: September 11, 2016, 08:29:14 pm »

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: S10 Disassembly Help
« Reply #2 on: September 11, 2016, 08:38:34 pm »
Clutches usually have left hand threads on the mount

There's points and condenser under the flywheel
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .

Offline Legeance

  • 3 cube
  • *
  • Posts: 10
  • Karma: 1
Re: Stihl S10 Disassembly Help
« Reply #3 on: September 11, 2016, 09:33:30 pm »
ok so the clutch I just twist off? How do I get the thing under the flywheel off?

Offline 660magnum

  • Global Moderator
  • Nitro Hotsaw
  • *******
  • Posts: 6437
  • Karma: 249
  • For The Love Of Chainsaws
  • Location: NCO
Re: Stihl S10 Disassembly Help
« Reply #4 on: September 12, 2016, 08:46:36 am »
The flywheel sets on a taper of the crankshaft. It is also keyed.

Some people use a "puller" to get them off.

Some people put the nut back on the crankshaft with the top of the nut flush with the top of the threads on the crankshaft. Then they "tap" the nut with a BRASS HAMMER and the flywheel comes loose off the tapered crankshaft. The caution here is not to mess up the threads on the crankshaft!
We should share what we know... someone may learn...
That knowledge can live after us... and that "Pays It Forward".
Be all that you can be . . .
Informative Informative x 1 View List

Offline Glock37

  • 3 cube
  • *
  • Posts: 5
  • Karma: 1
  • Location: Pittsburgh Pa
Re: Stihl S10 Disassembly Help
« Reply #5 on: October 08, 2016, 10:26:31 am »
those 3 threaded holes are for a puller to be used to get fly wheel off
Informative Informative x 1 View List

 

Related Topics

  Subject / Started by Replies Last post
2 Replies
1328 Views
Last post March 21, 2011, 08:19:57 pm
by Cut4fun
Stihl 034 ??

Started by Cut4fun « 1 2 » Stihl

13 Replies
2082 Views
Last post November 28, 2011, 09:29:18 pm
by Al Smith
stihl 066

Started by tradguy « 1 2 3 » Stihl

20 Replies
1703 Views
Last post March 11, 2012, 01:25:23 pm
by tradguy
STIHL 441 C-M

Started by man of stihl « 1 2 3 » Stihl

25 Replies
1766 Views
Last post March 14, 2012, 08:53:30 pm
by WoodChuckr
7 Replies
692 Views
Last post May 20, 2012, 05:15:22 pm
by Cut4fun .
Stihl 034

Started by Cut4fun « 1 2 » Stihl

10 Replies
730 Views
Last post July 07, 2012, 04:41:10 am
by brokenbudget
Stihl 064

Started by Cut4fun « 1 2 » Stihl

13 Replies
979 Views
Last post July 28, 2012, 11:17:28 pm
by Cut4fun .
1 Replies
572 Views
Last post August 21, 2012, 09:34:17 pm
by rms61moparman
4 Replies
534 Views
Last post December 13, 2014, 09:25:41 am
by Cut4fun .
0 Replies
284 Views
Last post December 26, 2013, 09:50:16 am
by Cut4fun .